radmerc

Back to Profile

radmerc

About

Username: radmerc
Joined: December 2019
Visits: 71
Last Active: November 16
Roles: Member, OG
Thanked: 16

Thank you @InceptionHosting for your excellent service over the years. In my book, you've been the best provider, surpassing much more expensive competitors and always provided excellent support.

Thanked by (1)imok
Well, it's working great so far. I guess the problem is solved :) I have no idea in the end but hope that at least some of the stuff mentioned in this topic will help others who might have similar is…

Thanked by (1)uptime
1. Update
2. Install `nano`
3. Change SSH port
4. root@ssh only without-password

Thanked by (1)evnix
CentOS - Basic start for me for personal servers which are meant to 'setup, run and forget' and for job related tasks
Fedora - For my desktops because it works, is similar in many ways to the …

Thanked by (2)cybertech FlamingSpaceJunk
Alright, so the good news is - I've installed nextcloud and the uptime of the machine itself is past 24hours. Everything is still working, I've synced all my files without problems.

Ba…

Thanked by (2)InceptionHosting uptime
Alright, after some long hours of idling it's all still working good. I just connected via ssh without problems and the wget goes really smooth. Compared to my previous installation I've removed all …

Thanked by (2)uptime AlwaysSkint
I am past tweaks to perf which turned out useless. Currently went with tuned which frankly I never had need to do, setting `tuned-adm profile latency-performance`which I believe puts a lot more effor…

Thanked by (2)uptime AlwaysSkint
Ok, confirming previous observations that things get slow after idling, here's my result after the night of the VPS doing nothing:
![](http://talk.lowendspirit.com/uploads/editor/k5/yn99m0px34…

Thanked by (1)uptime
@AnthonySmith @uptime

Unfortunately as I've mentioned previously - I already have the virtio block device drivers on.
I have however found something unusual and just confirmed …

Thanked by (1)uptime
@AnthonySmith
My results against 100MBps files are sometimes similar but things change drastically if I let the download run for more than few seconds. My assumption on this was that possibly…

Thanked by (1)uptime
@AnthonySmith
Thank you. I really appreciate your help.

@uptime
![](http://talk.lowendspirit.com/uploads/editor/gh/ynwqjnf4jxxd.png "")

This is what happ…

Thanked by (1)uptime
@AlwaysSkint
I set the gateway, ip etc. as static but exactly according to what I got from DHCP during setup. I was thinking that perhaps there is some other way to verify if the information …

Thanked by (1)uptime