MrVM Zerotier not working. (Solved)

go626201 · May 2020

Does anyone know why the zerotier does not working in MrVM NAT VPS?
My TUN/TAP is enabled in control panel. Wireguard is working.

Edit:
Add this picture

Resolution:
https://github.com/zerotier/ZeroTierOne/issues/699#issuecomment-456768506

InceptionHosting · May 2020

What port is it trying to use?

go626201 · May 2020

@AnthonySmith said:
What port is it trying to use?

The default one should be localhost:9993. I thought localhost does not need the public ip port?

NanoG6 · May 2020

@go626201 said: zerotier

Interesting. What is the use case for this?

Neoon · May 2020

@NanoG6 said:

@go626201 said: zerotier

Interesting. What is the use case for this?

Its like zinc but with a fancy webui, basically zinc for lazy people.
You can setup a giant peer to peer LAN.

go626201 · May 2020

@NanoG6 said:

@go626201 said: zerotier

Interesting. What is the use case for this?

It can use for grouping a numbers of network device into a private virtual network without a public ip.
Within the network every device can communicate as similar to all located at local network.

mikho · May 2020

@go626201 said:
Resolution:
https://github.com/zerotier/ZeroTierOne/issues/699#issuecomment-456768506

Kudos for posting this!!

Not everyday I see someone posting the solution to their problem when they find it themself.

Thank you!

sanvit · May 2020

Lol, I actually had the same issue, and I thought it was an OVZ thing.

Thanks for the post!

go626201 · May 2020

@mikho said:

@go626201 said:
Resolution:
https://github.com/zerotier/ZeroTierOne/issues/699#issuecomment-456768506

Kudos for posting this!!

Not everyday I see someone posting the solution to their problem when they find it themself.

Thank you!

Actually i almost give out already,because i have search for resolution for about 8hours.And i thought it was the kernel problem,because last year i was using i-83,i didn't met this problems.

@sanvit said:
Lol, I actually had the same issue, and I thought it was an OVZ thing.

Thanks for the post!

I think it is kernel problem,newer version should had fix for it.

mikho · May 2020

@go626201 said:
Actually i almost give out already,because i have search for resolution for about 8hours.And i thought it was the kernel problem,because last year i was using i-83,i didn't met this problems.

I have never used an i-83 product, I might be out on the deep end.... I have a hard time to think that i-83 would have OVZ7 last year.
And the kernel is newer on OVZ7 then OVZ6.

go626201 · May 2020

@mikho said:

@go626201 said:
Actually i almost give out already,because i have search for resolution for about 8hours.And i thought it was the kernel problem,because last year i was using i-83,i didn't met this problems.

I have never used an i-83 product, I might be out on the deep end.... I have a hard time to think that i-83 would have OVZ7 last year.
And the kernel is newer on OVZ7 then OVZ6.

Their technical support really not "quick" response...(they never send replies back)
There was a few weeks that their SG Node being abuse by someone,and they not trying to fix it...(Maybe i was wrong,might just be a network issue,but i don't think so,since the latency is very ridiculous - 500 to 800ms to 8.8.8.8 or 1.1.1.1)

And that why i change to use your service,but with bandwidth limit.

MrVM Zerotier not working. (Solved)

Comments