Crab

Back to Profile

Crab

About

Username: Crab
Joined: November 2023
Visits: 882
Last Active: 5:51AM
Roles: Member
Thanked: 85

> @Not_Oles said:
> You posted just prior to 4 AM in Turkiye! Are you sure you are in Turkiye?

As an old school hacker, you should know very well that 4am is very product…

Thanked by (1)Not_Oles
In case anybody has been trying to set up FreeBSD as a VPN server and has been struggling with somewhat lackluster network performance with virtio drivers (e1000 actually work very well in KVM), keep…

Thanked by (2)GeekWanderer AlwaysSkint
> @emperor said:
> Sadly after 2 months tinkering with BSD's i just could not resist and went back to this beauty on Linveo
>
> <a href="https://ibb.co/LRDCDzz"&g…

Thanked by (1)Not_Oles
> @webz said:
> @ReliableSiteHosting Intel Special 64GB - is this server already gone, cannot find it listed there also what model CPU is this?

"Sold out servers will be a…

Thanked by (2)ReliableSiteHosting webz
The handbook should have everything needed:

https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-building

https://docs.freebsd.org/en/books/handbook/po…

Thanked by (1)Not_Oles
Thank you everybody involved to put this together! I'll definitely try this out .

Thanked by (1)Not_Oles
> @cmeerw said:
> Interesting, I only ever get as far as this with OpenBSD:

This is the problem with x86_64 image. Regular x86 works fine.

Thanked by (1)Not_Oles
> @Not_Oles said:
> @Crab What's up in the FreeBDSD world?

Since everything "just works" every day and night, there's not much to report but 100% uptime across the board!<…

Thanked by (1)Not_Oles
> @Not_Oles said:
> [ 2.884958] WARNING: 8 errors while detecting hardware; check system log. # What's with this?

Not sure, but it might be just scanning all the po…

Thanked by (1)Not_Oles
> @linveo said:
> Do you want switched over to an AMD Ryzen node?

Thank you for the offer! Since it sounds like everybody else has already gone to AMD, I think it is bette…

Thanked by (3)AlwaysSkint Not_Oles linveo
Accidental double post.

Thanked by (1)Not_Oles
> @cmeerw said:
> > @linveo said:
> > > @cmeerw said:
> > > @linveo Just having a quick look around the installation options on the VM dashboard. From …

Thanked by (3)AlwaysSkint linveo Not_Oles
> @cmeerw said:
> I have put together another [NetBSD 10.0 image](https://edge.cmeerw.net/netbsd-10.0-v2.qcow2). With some luck that should now even apply the network configuration and a…

Thanked by (2)Not_Oles AlwaysSkint
> [@linveo said](/discussion/comment/186415/#Comment_186415): I wonder if it needs to be from scratch and this can't be changed mid install.

If you want to setup another VM with tho…

Thanked by (1)Not_Oles
> @linveo said:
> I have changed yours over to QEMU 64bit.

It seems to be no-go. Powered the VM off and it doesn't even boot anymore. Control panel just says FAILED after …

Thanked by (2)AlwaysSkint Not_Oles
> [@linveo said](/discussion/comment/186411/#Comment_186411): I am happy to change it for anyone that wants to try another setting such as QEMU.

Yes please change my VM's settings, …

Thanked by (2)AlwaysSkint Not_Oles
Does VirtFusion have CPU topology settings hidden somewhere? When I look at the server creation API ([https://docs.virtfusion.com/api/#api-Servers-Build](https://docs.virtfusion.com/api/#api-Servers-…

Thanked by (2)AlwaysSkint Not_Oles
Excellent discovery @cmeerw !

Looking at the kernel code at https://cdn.netbsd.org/pub/NetBSD/NetBSD-current/src/sys/arch/x86/x86/cpu_topology.c lp_max means the maximum logical proce…

Thanked by (1)Not_Oles
> @linveo said:
> * Added support for FreeBSD memory usage display.

I tried this out since I was curious about its implementation. By default it is trying to access /proc/…

Thanked by (4)linveo FrankCastle Not_Oles AlwaysSkint
I noticed Linveo VirtFusion panel had changed its appearance, so I was wondering if a newer version was installed with potentially better support, but booting NetBSD and OpenBSD ISOs failed the same …

Thanked by (4)linveo AlwaysSkint GeekWanderer Not_Oles
I have had one VirMach VM since 2018 and with mixed feelings I have to say that it has one of the highest uptimes I have ever had. Based on everything I have read over here it shouldn't be possible, …

Thanked by (1)ZA_capetown
FreeBSD works great on the Linveo instance and I'm very happy with its performance. Network is snappy and the node doesn't feel like it is crowded at all. Disk I/O is superfast. With both Root-on-ZFS…

Thanked by (1)linveo
@Not_Oles Just saying as a friend, you might find more peacefulness for example by going fishing. Perhaps it would be time for you to take a day or two off instead of trying to deep deeper meaning in…

Thanked by (1)Not_Oles
I was able to get a screenshot of 9.4 just before the reboot and it was showing

WARNING: couldn't open /var/db/entropy-file
Loading /stand/amd64/9.4/modules/cd9660/cd9660.kmod

Thanked by (2)AlwaysSkint Not_Oles
> @emperor said:
> @Crab if you already set ipv6_defaultrouter in rc.conf can you try issuing this to see if its gonna work? I remember i needed to do it manual as something is broken an…

Thanked by (1)Not_Oles
> @emperor said:
> If anyone struggle with ipv6 setup on Ohio network, just set the prefixlen to 48 instead 64 . In Arizona was working fine with 64 prefixlen.

It is the s…

Thanked by (1)Not_Oles
OpenBSD 7.2 i386 - boots
OpenBSD 7.3 i386 - boots
OpenBSD 7.4 i386 - boots
OpenBSD 7.5 i386 - boots
OpenBSD 7.2 amd64 - boot hangs late
OpenBSD 7.3 amd64 - boot han…

Thanked by (1)Not_Oles
OpenBSD 7.2 i386 actually did boot. Let me do some more testing here.

Thanked by (1)Not_Oles
> @AlwaysSkint said:
> I used netboot.xyz and got OpenBSD booted and (semi-)manually installed - hurrah!

Interesting...I tried booting OpenBSD with netboot.xyz and it hang…

Thanked by (1)Not_Oles
> @Otus9051 said:
> hey there!
> ![](https://files.catbox.moe/h2b8ui.png "")
>

FreeBSD just works.

Thanked by (1)Not_Oles
> @Otus9051 said:
> Got my @linveo VM, time to set it up!

Get that BSD rockin'!

Thanked by (1)Not_Oles
I went through the latest OpenBSD and NetBSD ISOs and i just couldn't get them booting up despite of whatever boot options I used, so it is a big bummer. Hopefully VF support can give some pointers o…

Thanked by (1)Not_Oles
> @cmeerw said:
> > @cmeerw said:
> > > [@Not_Oles said](/discussion/comment/185686/#Comment_185686): But, what is my mistake? When I try to log in, I get:
>…

Thanked by (1)linveo