Low End Dedicated Server Share, Vint Hill, Virginia, USA -- Part IIIa BF
Not_Oles
Provider
Friendly greetings!
As you know from our previous ads,[1] MetalVPS now has a Low End dedicated server, an OVH SYS-LE-1.
Black Friday Update: There are now two new servers, Kimsufi KS-1-B. apparently with identical specs to the SYS machine.
From shell accounts on these servers, we can work directly on the bare metal. Of course, we also can see how well the server node is performing.
Incus has been installed. From our shell accounts, with Incus, or in other ways, we easily can launch Linux containers and/or our own KVM VPSes with many Linux distributions and almost any BSD or other custom operating systems. With Incus, both the container and KVM launch processes are simple:
# Debian Linux Container
debian@vh:~$ incus launch images:debian/13 test-container
# Debian KVM Virtual Machine
debian@vh:~$ incus launch images:debian/13 test-vm --vm
# NetBSD 11.0 Virtual Machine
debian@vh:~$ incus launch images:netbsd/11.0 my-netbsd11 --vm
Sudo
Sudo is not necessary to make VPSes and containers. Nevertheless, presently, there are two neighbors on the SYS server, myself (Tom, @Not_Oles), and another LES member. We both have sudo. However, the other LES member has kindly offered to give up sudo if someone comes aboard who objects to anyone besides me having sudo. Alternatively, if someone else comes aboard who wants sudo, we can consider adding our new neighbor to the sudo group.
Limits
There are no limits on number of containers and KVM VPSes per account. There are no per account limits on processor cores, RAM, disk, or bandwidth.
Current Usage
Not_Oles@vh:~$ date
Mon Nov 16 20:46:55 UTC 2026
Not_Oles@vh:~$ uptime
20:46:58 up 11 days, 18:46, 1 user, load average: 0.00, 0.03, 0.00
Not_Oles@vh:~$
Supporting LES
Hopefully this thread could support LES with positive and helpful conversations! Let's try!
Specifications
Intel Xeon D-2123iT
4 cores; 8 threads
32 GB DDR4 ECC RAM
2 x 4 TB SATA HDD
Debian 13.7
ZFS RAID 1
1 x IPv4/32 (More available); 1 x IPv6/64
The Kimsufis say IPv6/128, but adding additional IPv6 IPs seems to work.
500 Mbits/sec unmetered
Vint Hill, Virginia USA
Cost paid by @Not_Oles to OVH for SYS server: $25/month with a $25 setup fee
Black Friday, new Kimsufi servers:
Cost paid by @Not_Oles to OVH for Kimsufi servers: $20.40/month with no setup fee
Pricing
$15.00/month
Black Friday, $12.25/month
PayPal Payment Link
You must be signed in to view this section.
How to Get Access
Please post in this thread.
Please remember to post or send your ssh public key.
Terms of Service
Free and open source software only.
White hat only.
For computer education and fun!
Not for commercial use.
No service level agreement.
No control panel.
Warnings!
Ephemeral. Could disappear at any moment! The more expensive SYS servers might go soon.
Clueless™ Administrator!
Hetrix Tools Uptime Ping Monitors
[1]
https://lowendspirit.com/discussion/11559/low-end-dedicated-server-share-vint-hill-virginia-usa/p1
https://lowendspirit.com/discussion/11605/low-end-dedicated-server-share-vint-hill-virginia-usa-part-ii/p1
Comments
good
A while back I heard about the Portable C Compiler, see also Wikipedia article on Portable C Compiler. I took a quick look at Steve Johnson's paper, A Tour Through the Portable C Compiler.
Looking around a bit more showed that the PCC compiler was in or had been in both OpenBSD and NetBSD, both of which moved on from GCC 4 and PCC to more modern design compilers which use C++ even in the compiler itself. NetBSD nowadays has a lot of code which is compiled with
-std=gnu11. The impression I got from looking around is that it's probably not feasible to compile all of nowadays NetBSD with PCC.Not being an expert in any of this, it's tricky. Nevertheless, somehow, on NetBSD-current, I managed to compile the latest PCC from Github with GCC and then use the new, GCC compiled PCC to compile itself. Then I used the self-compiled PCC to compile Git from the Github sources.
Even though PCC was and still is found in NetBSD's sources, it takes a bit of Googling to find reports of PCC successfully compiling the NetBSD kernel. On July 24, 2014, William D. Jones posted to the NetBSD-current mailing list that "pcc has also just successfully built a kernel for my i486 machine." I am not at all sure, but it seems this July 24, 2014 report might be the most recent report of PCC success compiling a NetBSD kernel.
NetBSD-6-1-5 was released in September 2014 shortly after the July 2014 success report. I imagine what was released in September 2014 might correspond roughly to what was in NetBSD-current toward the end of July 2014. NetBSD-6-1-5 has some interesting, old features. For example I hear that it can't do modern TLS. But FTP seems to work, even over IPv6:
I thought it might be fun to make a Qemu VPS with NetBSD-6-1-5 and see whether I could compile an older-C kernel with the built-in PCC and/or with current PCC.
It was fun finding the older versions of NetBSD in the official NetBSD archive. I managed to download the boot-com install ISO, the sources, the binary pre-compiled sets, plus the pkgsrc 2015Q1 release.
Here are the boot messages:
GCC is installed by default, but PCC, although in the source code, requires a custom compile.
We will see what happens as things proceed. Meanwhile, I welcome others, and their projects, to this fun Debian node!
Looks like the retro NetBSD-6.1.5 VM from 2014 on vh might be building NetBSD from ~2014+ sources. I used CVS to update the sources to the latest for NetBSD-6-1:
Here is the build command that's running right now:
My guess is the build, if it succeeds, will take at least 6 hours, maybe 9? So probably I will sleep and check tomorrow to see what happened.
Hello! The build still is going!
The build is on GENERIC now, so almost done. Plus, we have PCC!
Next time compile with -j 8 you have enough threads to do it.
14 cents per month netbsd at this aff TierHive
@dbadude Thanks! Leaving room for you or someone else.
@dbadude Something more about speed. I enjoy things going a little slower so I have a better chance of being able to read the terminal output as it scrolls by. So, often I don't enable KVM and just run VPSes under standard Qemu emulation. If I keep using this VPS, I might try adding a couple more cores and\or adding "-enable-kvm." I want it to be fast enough to compile overnight, so a couple more cores or adding KVM might be enough. However I do it, I want to make sure there is enough oomph left over for other guys who might join.
Well, the compile now seems to have completed successfully.
One goof is that usually I don't install X, but it's here, and I forgot to include X in the build command. So I will go again with the "-u" and "-x" build.sh flags to save re-compiling what's just been done and to add X Windows to the object directory. Then install kernel, reboot, install userland, reboot again, backup. Finally I have to decide whether I want to try compiling GENERIC with PCC or try a minimal MYKERNEL build with PCC.
Only one other guy besides me on the server, so there is space for someone else.
Thanks everyone!
Okay, the X11 enabled rebuild finished successfully!
--------
In other news, I got a couple of additional servers just this afternoon. Same OVH hardware and location as here, but cheaper, $20.40/month and no setup fee. Posted about the OVH deal here.
Maybe I can lower the price for a MetalVPS account? I think the LES BF thread might go live tomorrow with a $15 MetalVPS offer previously prepared. We will see what happens as events proceed.
@xDorito sent you a PM.
More soon! Best wishes!