He doubled the resources so did I, that was the deal so I guess yes.
But keep in mind, its fair share, the Port is limited to 100Mbit for reasons, the highest port speed we have enabled yet for microLXC however I/O and CPU is shared since its a Virtual Machine.
Just the theoretical numbers you could burst into for some time.
Nice limit you havw for disk iops and network bandwidth..
⭕ A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
⭕ Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.
⭕ A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
⭕ Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.
@Mr_Tom said: Were you running anything else at the same time? I know it's an older E5 but I would have expected a little higher.
to be fair, I can't remember / didn't care ;-) that score is totally fine for me as I knew it'd be an E5 and the thing is rarely needing cpu power. only running borg once in a while, but that's not gonna be time ciritical.
I already put close to 2TB data in, I can run another yabs later while idle, to see if it's the same... but essentially don't care much because it's storage 🤷🏻♂️
@Mr_Tom said: Nothing fancy to be honest. HDDs are hardware RAID with a little bit of controller/NVMe caching. EVerything is provisioned on LVM.
It just helps with making everything a bit more usable/speedier on the older CPUs.
feels pretty snappy, definitely very good performance for the money (and my use case ;-)) - absolutely recommended!
about the same. but as said nothing to worry, that's just what the cpu can deliver... and as can be seen the multicore score fully scales on that, so this is a sign that there is not much going on at the whole node either.
@Falzo said: about the same. but as said nothing to worry, that's just what the cpu can deliver... and as can be seen the multicore score fully scales on that, so this is a sign that there is not much going on at the whole node either.
No worries. I did a YABS around New Year and it was a little higher but that's probably about right to be honest
@Falzo said:
looks like a decent box indeed. the 100 Mbit is a bummer still...
True. Its not all bad as thats only upload and if I need anything from it my home internet cant pull faster than 60mbit anyway lol
yeah for me it's the other way round... home is 1gbps down, 50mbps up, if Vodafone plays nicely that is (and rarely happens in a stable way) - so I'd be rather limited both directions 🤦🏻♂️
Nice. We get good old copper phone line 60mbps down/20mbps up lol.
yeah the best I could get out of copper here is 15mpbs/2.5mbs 🤦🏻♂️
the alternative is (tv) cable, which brings speed - however, as said, it's ... fragile. on a daily basis.
in an ideal world 300/100 or the likes would be awesome. maybe LTE/5G or something delivers that (soon?). yet you usually get only limited transfer. like 100-200GB with that. obviously quite a fail too, especially if moving a lot of data during spring clean...
imagine pushing 3TB through a flaky 50mbps upload...
Ulefone Power Armor 14 Android 11 via Termux app: (almost) nothing works!
$ curl -sL yabs.sh | bash -s -- -r
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2021-12-28 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Sun Jan 23 22:20:20 EST 2022
bash: line 26: locale: command not found
Warning: locale 'C' not detected. Test outputs may not be parsed correctly.
bash: line 43: getconf: command not found
ARM compatibility is considered *experimental*
Basic System Information:
---------------------------------
Processor : Cortex-A53
CPU cores : 8 @ 2301.0000 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM : 3.7 GiB
Swap : 2.0 GiB
Disk :
Generating fio test file...main: line 307: 28669 Bad system call $FIO_CMD --name=setup --ioengine=libaio --rw=read --bs=64k --iodepth=64 --numjobs=2 --size=$FIO_SIZE --runtime=1 --gtod_reduce=1 --filename=$DISK_PATH/test.fio --direct=1 --minimal &> /dev/null
Running fio random mixed R+W disk test with 4k blo
Running fio random mixed R+W disk test with 64k bl
Running fio random mixed R+W disk test with 512k b
Running fio random mixed R+W disk test with 1m blo
fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k (IOPS) | 64k (IOPS)
------ | --- ---- | ---- ----
Read | () | ()
Write | () | ()
Total | 0.00 KB/s (0) | 0.00 KB/s (0)
| |
Block Size | 512k (IOPS) | 1m (IOPS)
------ | --- ---- | ---- ----
Read | () | ()
Write | () | ()
Total | 0.00 KB/s (0) | 0.00 KB/s (0)
iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Clouvider | London, UK (10G) | busy | busy
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Online.net | Paris, FR (10G) | busy | busy
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Clouvider | NYC, NY, US (10G) | busy | busy
iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Clouvider | London, UK (10G) | busy | busy
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Online.net | Paris, FR (10G) | busy | busy
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Clouvider | NYC, NY, US (10G) | busy | busy
Geekbench 5 test failed. Run manually to determine cause.
We accept Karma donations for the last flan. 🍮 affbrr
@yoursunny said: Ulefone Power Armor 14 Android 11 via Termux app: (almost) nothing works!
$ curl -sL yabs.sh | bash -s -- -r
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2021-12-28 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Sun Jan 23 22:20:20 EST 2022
bash: line 26: locale: command not found
Warning: locale 'C' not detected. Test outputs may not be parsed correctly.
bash: line 43: getconf: command not found
ARM compatibility is considered *experimental*
Basic System Information:
---------------------------------
Processor : Cortex-A53
CPU cores : 8 @ 2301.0000 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM : 3.7 GiB
Swap : 2.0 GiB
Disk :
Generating fio test file...main: line 307: 28669 Bad system call $FIO_CMD --name=setup --ioengine=libaio --rw=read --bs=64k --iodepth=64 --numjobs=2 --size=$FIO_SIZE --runtime=1 --gtod_reduce=1 --filename=$DISK_PATH/test.fio --direct=1 --minimal &> /dev/null
Running fio random mixed R+W disk test with 4k blo
Running fio random mixed R+W disk test with 64k bl
Running fio random mixed R+W disk test with 512k b
Running fio random mixed R+W disk test with 1m blo
fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k (IOPS) | 64k (IOPS)
------ | --- ---- | ---- ----
Read | () | ()
Write | () | ()
Total | 0.00 KB/s (0) | 0.00 KB/s (0)
| |
Block Size | 512k (IOPS) | 1m (IOPS)
------ | --- ---- | ---- ----
Read | () | ()
Write | () | ()
Total | 0.00 KB/s (0) | 0.00 KB/s (0)
iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Clouvider | London, UK (10G) | busy | busy
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Online.net | Paris, FR (10G) | busy | busy
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Clouvider | NYC, NY, US (10G) | busy | busy
iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Clouvider | London, UK (10G) | busy | busy
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Online.net | Paris, FR (10G) | busy | busy
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Clouvider | NYC, NY, US (10G) | busy | busy
Geekbench 5 test failed. Run manually to determine cause.
why buy an unknown support china brand phone? xiaomi / oppo / vivo / honor are way better
Ulefone Power Armor 14 Android 11 via Termux app: (almost) nothing works!
$ curl -sL yabs.sh | bash -s -- -r
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
# Yet-Another-Bench-Script #
# v2021-12-28 #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
Sun Jan 23 22:20:20 EST 2022
bash: line 26: locale: command not found
Warning: locale 'C' not detected. Test outputs may not be parsed correctly.
bash: line 43: getconf: command not found
ARM compatibility is considered *experimental*
Basic System Information:
---------------------------------
Processor : Cortex-A53
CPU cores : 8 @ 2301.0000 MHz
AES-NI : ✔ Enabled
VM-x/AMD-V : ❌ Disabled
RAM : 3.7 GiB
Swap : 2.0 GiB
Disk :
Generating fio test file...main: line 307: 28669 Bad system call $FIO_CMD --name=setup --ioengine=libaio --rw=read --bs=64k --iodepth=64 --numjobs=2 --size=$FIO_SIZE --runtime=1 --gtod_reduce=1 --filename=$DISK_PATH/test.fio --direct=1 --minimal &> /dev/null
Running fio random mixed R+W disk test with 4k blo
Running fio random mixed R+W disk test with 64k bl
Running fio random mixed R+W disk test with 512k b
Running fio random mixed R+W disk test with 1m blo
fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k (IOPS) | 64k (IOPS)
------ | --- ---- | ---- ----
Read | () | ()
Write | () | ()
Total | 0.00 KB/s (0) | 0.00 KB/s (0)
| |
Block Size | 512k (IOPS) | 1m (IOPS)
------ | --- ---- | ---- ----
Read | () | ()
Write | () | ()
Total | 0.00 KB/s (0) | 0.00 KB/s (0)
iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Clouvider | London, UK (10G) | busy | busy
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 send test to Online.net (At
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Performing IPv4 iperf3 recv test from Online.net (
Online.net | Paris, FR (10G) | busy | busy
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 send test to Clouvider (Att
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Performing IPv4 iperf3 recv test from Clouvider (A
Clouvider | NYC, NY, US (10G) | busy | busy
iperf3 Network Speed Tests (IPv6):
---------------------------------
Provider | Location (Link) | Send Speed | Recv Speed
| | |
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Clouvider | London, UK (10G) | busy | busy
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 send test to Online.net (At
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Performing IPv6 iperf3 recv test from Online.net (
Online.net | Paris, FR (10G) | busy | busy
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 send test to Clouvider (Att
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Performing IPv6 iperf3 recv test from Clouvider (A
Clouvider | NYC, NY, US (10G) | busy | busy
Geekbench 5 test failed. Run manually to determine cause.
why buy an unknown support china brand phone? xiaomi / oppo / vivo / honor are way better
Sox or seven years ago one could say the same thing about most the brands you mentioned. Many of them are top three brands in most markets they serve. Many of them are owned by same company btw.
Before/After on nexus migration. About same overall with io and net down a bit
@havoc said:
Nexus says my VPS is getting migrated (DE>>NL) so dropping a before here & after to follow a bit later.
Big gotcha though - not representative of migration overall. It's a grandfathered once off clearance special with nine lives and a lot of luck that @seriesn very honourably rolled 1:1 specs wise last migration when really the platforms were not 1:1 comparable at all. So regardless of before/after results I won't be complaining
⭕ A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
⭕ Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.
Comments
He doubled the resources so did I, that was the deal so I guess yes.
But keep in mind, its fair share, the Port is limited to 100Mbit for reasons, the highest port speed we have enabled yet for microLXC however I/O and CPU is shared since its a Virtual Machine.
Just the theoretical numbers you could burst into for some time.
Free NAT KVM | Free NAT LXC
Nice limit you havw for disk iops and network bandwidth..
⭕ A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
⭕ Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.
Indeed booth are capped at 100, should be enough.
Traffic s counted but the Traffic limit is not really enforced yet.
Free NAT KVM | Free NAT LXC
Hosthatch JP, seems to be 1Gbps port.(Manually iperf3 with 20 threads can reach 2.48Gbps)
Noice performance VPS from HostHatch..
⭕ A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
⭕ Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.
Nexus Bytes Melbourne
Here's for Singapore...
Maybe more ppl running BM or ... @seriesn has different dicks disks config in SG
Mon 17 Jan 2022 10:04:53 PM EST Basic System Information: --------------------------------- Processor : AMD Ryzen 9 3900X 12-Core Processor CPU cores : 2 @ 3792.874 MHz AES-NI : ✔ Enabled VM-x/AMD-V : ✔ Enabled RAM : 1.9 GiB Swap : 0.0 KiB Disk : 29.5 GiB fio Disk Speed Tests (Mixed R/W 50/50): --------------------------------- Block Size | 4k (IOPS) | 64k (IOPS) ------ | --- ---- | ---- ---- Read | 263.01 MB/s (65.7k) | 2.69 GB/s (42.0k) Write | 263.70 MB/s (65.9k) | 2.70 GB/s (42.2k) Total | 526.72 MB/s (131.6k) | 5.39 GB/s (84.3k) | | Block Size | 512k (IOPS) | 1m (IOPS) ------ | --- ---- | ---- ---- Read | 3.98 GB/s (7.7k) | 3.77 GB/s (3.6k) Write | 4.19 GB/s (8.1k) | 4.02 GB/s (3.9k) Total | 8.17 GB/s (15.9k) | 7.79 GB/s (7.6k) Geekbench 4 Benchmark Test: --------------------------------- Test | Value | Single Core | 5496 Multi Core | 9330GB5 in similar range as what @corbpie posted.
blog archives
what did you pay after discount, prior to reimbursement?
I bench YABS 24/7/365 unless it's a leap year.
My kind of size.. 38
blog archives
VM specialists hybrid wolves in UK
the disk io is the NVMe part... now you'd wonder, how it would look for the large storage...
fio Disk Speed Tests (Mixed R/W 50/50):
dunno what kind of magic trickery @Mr_Tom did there underneath... zfs with an nvme caching device maybe? awesome sh*t!!
@Falzo now you're making me regret not picking it up
Team push-ups!
go get one... it's again available https://console.vmspecialist.com/order/main/packages/order/?group_id=2
servarica lion ssd
lite server storage
HT-hosting Christmas deal
there seems to be some bugs with this one , i may update later
OVH
Central.so Budget KVM-Silver SG
ZappieHost 4GB Chile KVM @Zappie
Free NAT KVM | Free NAT LXC
Excited to see the server go live for your project(s)
Smolest Dedi (Thinclient) 4GB Dedi by @natvps_uk
Free NAT KVM | Free NAT LXC
Were you running anything else at the same time? I know it's an older E5 but I would have expected a little higher.
Nothing fancy to be honest. HDDs are hardware RAID with a little bit of controller/NVMe caching. EVerything is provisioned on LVM.
It just helps with making everything a bit more usable/speedier on the older CPUs.
to be fair, I can't remember / didn't care ;-) that score is totally fine for me as I knew it'd be an E5 and the thing is rarely needing cpu power. only running borg once in a while, but that's not gonna be time ciritical.
I already put close to 2TB data in, I can run another yabs later while idle, to see if it's the same... but essentially don't care much because it's storage 🤷🏻♂️
feels pretty snappy, definitely very good performance for the money (and my use case ;-)) - absolutely recommended!
edit:
Geekbench 5 Benchmark Test: --------------------------------- Test | Value | Single Core | 563 Multi Core | 2168 Full Test | https://browser.geekbench.com/v5/cpu/12283382about the same. but as said nothing to worry, that's just what the cpu can deliver... and as can be seen the multicore score fully scales on that, so this is a sign that there is not much going on at the whole node either.
No worries. I did a YABS around New Year and it was a little higher but that's probably about right to be honest
Still pretty crazy this thing is free, but thanks Oracle! Pretty good CPU performance for an ARM host.
yabs daddy
KS-LE but with 4tb drives.
Very nice and lucky find!
@Mr_Tom I've never seen a KS-LE with such high GB5 scores. What's the secret?
Team push-ups!
Not my find... https://talk.lowendspirit.com/discussion/comment/79898/#Comment_79898
Edit: they're advertised with 4tb drives, so it's not luck - from the KS panel: "KS-LE Server - Intel Xeon E5-1650v2 - 32GB DDR3 1333MHz - 2x 4To HDD"
I would have thought that score was about right for a 3.5ghz processor? My other LE (2tb drives) GB5 is 881
You got an upgraded processor as well! 12 cores vs 8
Team push-ups!
See my updated post - this is as advertised. Order form showed KS-LE Server - Intel Xeon E5-1650v2 - 32GB DDR3 1333MHz - 2x 4To HDD
looks like a decent box indeed. the 100 Mbit is a bummer still...
True. Its not all bad as thats only upload and if I need anything from it my home internet cant pull faster than 60mbit anyway lol
yeah for me it's the other way round... home is 1gbps down, 50mbps up, if Vodafone plays nicely that is (and rarely happens in a stable way) - so I'd be rather limited both directions 🤦🏻♂️
Nice. We get good old copper phone line 60mbps down/20mbps up lol.
yeah the best I could get out of copper here is 15mpbs/2.5mbs 🤦🏻♂️
the alternative is (tv) cable, which brings speed - however, as said, it's ... fragile. on a daily basis.
in an ideal world 300/100 or the likes would be awesome. maybe LTE/5G or something delivers that (soon?). yet you usually get only limited transfer. like 100-200GB with that. obviously quite a fail too, especially if moving a lot of data during spring clean...
imagine pushing 3TB through a flaky 50mbps upload...
You can adjust the IO, it's even better now for free
microLXC Chile
Free NAT KVM | Free NAT LXC
I was about to ask how you're running microlxc on nodes that small... when I realised that was the container itself lol
Indeed, https://talk.lowendspirit.com/discussion/comment/79732/#Comment_79732
You could nest more LXC container in that, but I would not recommend it.
Free NAT KVM | Free NAT LXC
Revisit to Hosthatch LAX Storage 1TB, after enabling IPv6
Lovely box, seems like they improved IOWait.
I bench YABS 24/7/365 unless it's a leap year.
Ulefone Power Armor 14 Android 11 via Termux app: (almost) nothing works!
We accept Karma donations for the last flan. 🍮 affbrr
why buy an unknown support china brand phone? xiaomi / oppo / vivo / honor are way better
I bench YABS 24/7/365 unless it's a leap year.
Sox or seven years ago one could say the same thing about most the brands you mentioned. Many of them are top three brands in most markets they serve. Many of them are owned by same company btw.
https://en.m.wikipedia.org/wiki/BBK_Electronics
blog archives
yabs daddy
revisit to alphavps giveaway
512GB storage
Sofia, BG
migrated to another node due to download speed
(all fixed now)
I bench YABS 24/7/365 unless it's a leap year.
Before/After on nexus migration. About same overall with io and net down a bit
After
racknerd last bench
san jose
I bench YABS 24/7/365 unless it's a leap year.
advinservers
Luxembourg
I bench YABS 24/7/365 unless it's a leap year.
HostHatch STO Storage enabled IPv6
⭕ A simple uptime dashboard using UptimeRobot API https://upy.duo.ovh
⭕ Currently using VPS from BuyVM, GreenCloudVPS, Gullo's, Hetzner, HostHatch, InceptionHosting, LetBox, MaxKVM, MrVM, VirMach.
Spaceberg.cc - Your favorite Seedbox provider!