Static Routed /48 to OpenWRT under CGNAT via WireGuard
Just like the title suggests. I want a static routed v6 /48 to my home router via WireGuard.
Here are a few things I have thought:
1. Adding a static route as routing v6 to router wireguard v6
2. Just doing a NAT though I really don't want to do that.
Idea is to make something like Route48.
youtube.com/watch?v=k1BneeJTDcU
All of my VMs: https://nodecheck.net/s/otusibrc/
Comments
Talk to @Cloudie before you attempt this endeavor
URL Shortener | YetiNode | Come join us on the MetalVPS IRC channel!!! | Don't be a jerk, let YetiNode do the work.
Since you have ASN, it's easy.
ServerFactory aff best VPS; HostBrr aff best storage.
Do I add the IP to the wg0 dev or my ens3 dev?
youtube.com/watch?v=k1BneeJTDcU
All of my VMs: https://nodecheck.net/s/otusibrc/
Neither side needs any address on the WireGuard interface or WAN interface.
You would need one address from your prefix on the LAN interface of the home router.
You can assign other addresses within the subnet to your LAN devices.
ServerFactory aff best VPS; HostBrr aff best storage.
This is the way
The all seeing eye sees everything...
Can I just then follow my guide on running Wireguard on OpenWRT (which I wrote for R48)
youtube.com/watch?v=k1BneeJTDcU
All of my VMs: https://nodecheck.net/s/otusibrc/
Apparently not, ugh.
youtube.com/watch?v=k1BneeJTDcU
All of my VMs: https://nodecheck.net/s/otusibrc/
Managed to kill/OOM my Vultr, ugh.
youtube.com/watch?v=k1BneeJTDcU
All of my VMs: https://nodecheck.net/s/otusibrc/