natboxio
natboxio
NAT VPS
About
- Username
- natboxio
- Joined
- Visits
- 34
- Last Active
- Roles
- Member, Provider
- Karma
- 40
Comments
-
@ascicode Still a lot of people! It runs a big chunk of the web, and plenty of folks just want a cheap place for a blog or portfolio without paying for shared hosting. @yoursunny There's no pre-baked image to go stale. WordPress is installed f…
-
(Quote) That's the real risk, and it's where most of my time goes as a small NAT host. What's worked so far: outbound 25/465/587 blocked for everyone, outbound connection patterns watched from the host (that's how we caught an at…
-
@pgstrik14 the laptop is usually the weak spot for people whose servers are all in git. Cheap fix: put your dotfiles and local configs in a private repo too (or use chezmoi), and keep SSH keys and secrets in your password manager, not only in ~/.ssh…
-
(Quote) @WSS Wrong WSS, but you're welcome on port 443 anytime. 😄
-
(Quote) @NStorm Yes, exactly. It's HAProxy in TCP mode. It reads the SNI from the ClientHello and passes the raw TCP stream to your server without decrypting it. So anything that is TLS from the first byte and sends a valid SNI works: HTTPS, WS…
-
@yoursunny Fair question! Nesting is off on purpose, for three reasons: * Shared kernel. Every container on a host shares one kernel. Turning nesting on relaxes some of the protections around that, so a bug that one container can reach becomes eve…
-
Thanks, ruedislik, that's a fair summary. 256 MB fits well for things like a small web server, a WireGuard or Tailscale endpoint, a DNS resolver, monitoring agents, or just learning your way around a fresh Linux box. You're right about LX…
-
Quick update since launch, for anyone still deciding: How fast is a new server? We went through our logs for all 108 servers ordered between 30 October and 9 November (92 trials, 16 paid). From order or payment to the "Service activated" …
-
(Quote) @friendlyguy12d Thanks for the honest feedback. To clarify, the port speed is 100 Mbit/s each way on every plan. What's metered is the monthly allowance, which is 250 GB on Nano up to 1 TB on Box Plus. If you go over it, your speed drop…
-
(Quote) @yoursunny Fair enough, and I agree a /64 is the right size. The reason is simple: each of our hosts is a Contabo VPS that comes with one /64. To give every server routed IPv6, we split it into /80s. We put /80 in the offer title so nobody i…
-
(Quote) No problem, thanks for taking a look. Good luck finding the right one, and I hope the DeluxHost restock works out for you.
-
@SHING Yes, that's me. I run natbox.io, and the offers you saw earlier today were ours. I wanted to be upfront about that, so take my earlier post as coming from a provider. The advice still stands whoever you buy from: check the TB allowance a…
-
(Quote) @jaehyun1122 Thanks! The free trial slots are all taken right now, but more should open up tomorrow or the day after, so check back then. The LES50OFF coupon is good until 30 December, but it's limited to 40 uses, so don't wait too…
-
(Quote) @stormhanma Yes, you get full root over SSH. Each server is an unprivileged Incus LXC container, so you can install packages, run services, edit configs and manage users as you like. The limits that come with LXC: no Docker or nested contain…
-
(Quote) @aphs We're planning to expand onto dedicated servers across Europe, but right now we're still in the launch stage.
-
@david3 FinCoder's (( $# )) version should actually work: with no arguments $# is 0, and (( 0 )) is false, so it takes the else branch. If it kept taking the first branch for you, there was probably an older lss still loaded in that shell (type…
-
A few free ones nobody's mentioned yet: Virtualmin (GPL, mature, handles multiple client accounts and resellers properly, a bit dated UI but very solid), CloudPanel (free, fast, very PHP/Node-focused, good if it's mostly WordPress sites an…
-
(Quote) @aphs Yes. We run two host VMs, and we can put your second server on the other one. Order it, then open a ticket (or DM me) with the invoice number before you pay, and I'll pin it to the other host. They'll also be on different IPv…
-
Update on both issues @tulipyun reported, and thanks again, this was a really useful report. IPv6: fixed for everyone. You were right that NDP was the problem. Our bridge filter only allowed IPv6 from each server's global addresses, so the nei…
-
Thanks for trying it and for the detailed report. The IPv6 one sounds like neighbor discovery for your /80 not being answered on our side, so the fact a static neighbor entry fixed it is a very useful clue. I'm looking into it now. On the speed…
-
To answer your Q2 directly: the port speed is the cheap part, and the bandwidth behind it is the expensive part. A 10G port on a VPS node is shared by dozens of VMs, so "10Gbps" at $2/mo really means "bursts above 1G for a few seconds…
-
One option nobody's mentioned: pyinfra. It's agentless like Ansible, but it runs plain shell commands over SSH, so the 128MB target doesn't need Python at all, and it's still idempotent, unlike raw. Combine it with cloud-init (or…
-
Worth knowing that PVE 9.1 added the ability to create LXC containers straight from OCI images (Docker Hub etc.), so a lot of what this plugin does is now possible without modding PVE at all. It's still a tech preview, but it gets upgraded with…
-
One thing that hasn't been mentioned: alert on backup age, not just job success. A job can exit 0 while backing up an empty mount or the wrong path. A dead-man's-switch ping (healthchecks.io or similar) only when the newest snapshot is und…
-
The second checksum isn't wasted: it's end-to-end, so it catches corruption in the virtualization or transport layer that the host's ZFS never sees. But on a single device, Btrfs can only detect bad blocks, not repair them, unless you…
-
Not run ATM10 on an M6 myself, but a couple of practical gotchas before you buy: Minecraft Java runs natively on Apple Silicon, so that side is fine. Palworld's dedicated server only ships for x86 Windows/Linux, though, so on macOS you'd b…
-
Worth a look depending on what you need: Mailcow if you want a full suite with webmail and a solid UI, Mox if you want a single Go binary that's easy to run on a small VPS, and Maddy if you just need a lightweight MTA. On a low-end box, Mox has…
-
Nice project. MCP support is an interesting touch for a panel. How does it handle the agents on each server: SSH, or a daemon you install? And is there an auth/2FA option on the web UI before people point it at 20+ boxes?
-
Interesting
-
Great
-
New member: natboxio Please introduce yourself and tell us why you want to join this forum? Hello! I'm a web hosting enthusiast and the founder of NATBox, a budget-friendly NAT VPS hosting service. I'd like to join LowEndSpirit to connec…