There is the famous popup live... but it's invisible for me and now I can't close it or do anything on service page
Okey, you need to kill 'fade' class on modal - it has opacity(0) and seems the fade IN 'animation' that should bring opacity from 0 to 100 is not working/not triggered whatever
and I am not even on mobile lolololol
Service Interruption Update
This service was part of a mass outage caused by our previous partner abruptly shutting down their operations. Your service has been physically migrated to a new provider and to restore connectivity quickly, your IP address was changed. Please check your control panel to view the new IP address.
If the new IP address does not work and you are using Linux, click the "Re-configure Networking" button. Please note, if we detect any issues after maintenance is complete, we may attempt to reconfigure the IP address for you which may result in 5-10 minutes downtime. If your IP address is still the old address, we are aware and actively working on the remaining changes.
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
@Jab said: There is the famous popup live... but it's invisible for me and now I can't close it or do anything on service page
Okey, you need to kill 'fade' class on modal - it has opacity(0) and seems the fade IN 'animation' that should bring opacity from 0 to 100 is not working/not triggered whatever
and I am not even on mobile lolololol
Hey now you know I was serious when I said you couldn't close it.
The backstory, the fade always causes issue but it somehow always ends up in our developer's code. Even he knows it, he just replied and said "yea definitely remove the fade class from the modal, forgot to remove it, it always causes issues"
@VirMach said: Added something to the pop-up message for you.
I was kind of disappointed that I did not have a pop up message, but I have one now. All is right with the world again. It even has a "close" button that functions as it should.
NYCB030 and NYCB043 got new IP. I pressed Fix Internet/Configure button but still cannot SSH to both. Looks like need to wait a little for IP to propagate globally.
@FrankZ said: Doubt this is going to happen as it would probable just screw up the works and the planned migrations already in progress.
does that mean it is being migrated to L.A?
I have no more information on what is going on then what has been published by VirMach. As far as I know Seattle is still up in the air right now, but whatever happens I'll be right there with you as I also have a VM on SEAZ002.
@lesuser said:
NYCB030 and NYCB043 got new IP. I pressed Fix Internet/Configure button but still cannot SSH to both. Looks like need to wait a little for IP to propagate globally.
That fix button keeps breaking my connection. It uses the wrong interface name in /etc/network/interfaces (Debian). Worth checking to see if that's what happened to you. If so, just a quick edit and /etc/init.d/networking restart is all that's needed.
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural. It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
@VirMach Can you update us what is the status of the routing/bgp problems at NY ?
I see in a popup :
"If you are having connectivity issues, this is normal. Since these are new IP addresses, they may take several hours to ping globally."
Range : 46.233.45.xxx
Monitor systems :
Status:
Ongoing
Started at:
2023-09-03 18:58:49
Duration:
3 d, 13 h, 27 m
There is nothing on the status page and no further information here.
I have a VM on this range also. I can get to it via ssh through a jump box I have at VirMach Amsterdam without using VNC. Can ping 8.8.8.8 and 9.9.9.9 from the VM. Most other places I am still waiting for routes to update.
@vgood said: Until now there hasn't been any progress and solutions @VirMach for LAX2Z019
It died. I expect the data recovery got put off because of bigger fish to fry. It was also stated
If you have important data and/or would like a new service brought online in the time being, please contact us.
I also am on LAX2Z019, but I have redundant data on a different VM, so I did not try contacting them for a temp replacement. So I am not really sure how that would go for you.
@vgood said: Until now there hasn't been any progress and solutions @VirMach for LAX2Z019
It died. I expect the data recovery got put off because of bigger fish to fry. It was also stated
If you have important data and/or would like a new service brought online in the time being, please contact us.
> @FrankZ
thank you for helping answer. actually the last VPS was just installed OS and there wasn't any data yet, then the VPS was off and couldn't be used.
I'm confused now, there are more menus for contacting @VirMach , even the request menu for moving nodes can't be used.
I want to create a ticket, it always looks like the picture below, I'm confused
NYCB021 (141.11.XX.XX) here. Routing seems to be completely established now, altough ping times from certain locations are still a bit funky. Atleast I can SSH into the box now
One of the options is direct upgrade from Debian 11.
nano /etc/apt/sources.list
deb http://deb.debian.org/debian bookworm main contrib non-free-firmware non-free
deb http://deb.debian.org/debian bookworm-updates main contrib non-free-firmware non-free
deb http://security.debian.org/debian-security bookworm-security main contrib non-free-firmware non-free
Damn you VirMach! Can you like have a bigger/longer outage so we can get +1 year for free on every VPS?!
This went kinda not bad for emergency migration - I hope other location you can get IP ranges already routed in advance and switch will be almost painless?
// 204.10.X.X seems to be fully routing now too
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
@Mumbly said:
One of the options is direct upgrade from Debian 11.
nano /etc/apt/sources.list
deb http://deb.debian.org/debian bookworm main contrib non-free-firmware non-free
deb http://deb.debian.org/debian bookworm-updates main contrib non-free-firmware non-free
deb http://security.debian.org/debian-security bookworm-security main contrib non-free-firmware non-free
@vgood said: Until now there hasn't been any progress and solutions @VirMach for LAX2Z019
It died. I expect the data recovery got put off because of bigger fish to fry. It was also stated
If you have important data and/or would like a new service brought online in the time being, please contact us.
> @FrankZ
thank you for helping answer. actually the last VPS was just installed OS and there wasn't any data yet, then the VPS was off and couldn't be used.
I'm confused now, there are more menus for contacting @VirMach , even the request menu for moving nodes can't be used.
I want to create a ticket, it always looks like the picture below, I'm confused
Generally if this occurs, you should not make a ticket and should check the network status page, but I've already reported this to our developer.
@King said:
Hello, Los Angeles Vps inaccessible, showing Operation Timed Out After 90001 Milliseconds With 0 Bytes Received? Why are there no failure reports?
Our monitoring system is going crazy because of all the other stuff, I noticed LAX have an outage at Hivelocity for at least one server and it's on my queue but my queue is endless. I'll try to at least get it added to network status page soon.
@JoeMerit said:
NY location is now with RoyaleHosting , is this an upgrade on dedipath?
I would say so, since they are operational and Dedipath is not.
I was asking more along the lines of their network stability/connectivity and ddos protection now with Royalehosting vs when Dedipath was in operation.
my NYCB040 node is alive, but the old data is not restored. Will it be restored? I actually want to do a fresh OS install while we are at this stage, but will it interfere with the ongoing process (if any)?
Routing issue for DALZ009 and DALZ006 appear to be caused by Psychz announcing these recently again for some reason, they've been sending us a ton of IP address change and of course invoices several times a month, I am guessing their techs just announced these anyway because it was on some other change list they were making. Trying to have it resolved, these should technically be online as well, just a coincidence.
@Jab said:
Damn you VirMach! Can you like have a bigger/longer outage so we can get +1 year for free on every VPS?!
I'd rather not take an extra year, but I want to spin the wheel for doubling the specs on my forever-free NVMe2G, but the chances shall be slightly in my favor after all the DeadPath stress.
For example, 69% chance of doubling to NVMe4G, 31% chance of having the server deleted instantly.
Two other providers offered me NVMe2G or SSD2G with price match, both with working IPv6.
Thus, having this IPv6less NVMe2G deleted at 31% chance is an acceptable risk.
We accept Karma donations for the last flan. 🍮 affbrr
Comments
There is the famous popup live... but it's invisible for me and now I can't close it or do anything on service page
Okey, you need to kill 'fade' class on modal - it has opacity(0) and seems the fade IN 'animation' that should bring opacity from 0 to 100 is not working/not triggered whatever
and I am not even on mobile lolololol
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
Hey now you know I was serious when I said you couldn't close it.
The backstory, the fade always causes issue but it somehow always ends up in our developer's code. Even he knows it, he just replied and said "yea definitely remove the fade class from the modal, forgot to remove it, it always causes issues"
also seems one of the IPs (104.243.X.X) seems to be fully BGP accepted
Oh, I would never doubt you about that, I've learned my lesson like <jesus, it's that long?> years ago.
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
204.10.xx.xxx is not even pinging, dead.
Added something to the pop-up message for you.
I was kind of disappointed that I did not have a pop up message, but I have one now. All is right with the world again. It even has a "close" button that functions as it should.
45.42.xxx.xx works good, 204.10.xx.xxx not much, but 100% pinging to China, maybe came from Alibaba.
@VirMach, is it possible to put Migrate button on Seattle node (SEAZ002) (to L.A) (no charge, of course)?
Doubt this is going to happen as it would probable just screw up the works and the planned migrations already in progress.
NYCB030 and NYCB043 got new IP. I pressed
Fix Internet/Configurebutton but still cannot SSH to both. Looks like need to wait a little for IP to propagate globally.Powerful AMD Ryzen VPS (aff)
does that mean it is being migrated to L.A?
I have no more information on what is going on then what has been published by VirMach. As far as I know Seattle is still up in the air right now, but whatever happens I'll be right there with you as I also have a VM on SEAZ002.
That fix button keeps breaking my connection. It uses the wrong interface name in /etc/network/interfaces (Debian). Worth checking to see if that's what happened to you. If so, just a quick edit and
/etc/init.d/networking restartis all that's needed.Yep, definitely don't recommend using the fix network button if you installed from an ISO or have a network interface not named "eth0".
Deja Vu.
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural.
It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
You need to put that then/than stuff back in your signature. I was using it as a reference, now I am totally lost again.
NYCB027 is still locked.
@VirMach Can you update us what is the status of the routing/bgp problems at NY ?
I see in a popup :
"If you are having connectivity issues, this is normal. Since these are new IP addresses, they may take several hours to ping globally."
Range : 46.233.45.xxx
Monitor systems :
Status:
Ongoing
Started at:
2023-09-03 18:58:49
Duration:
3 d, 13 h, 27 m
There is nothing on the status page and no further information here.
I have a VM on this range also. I can get to it via ssh through a jump box I have at VirMach Amsterdam without using VNC. Can ping 8.8.8.8 and 9.9.9.9 from the VM. Most other places I am still waiting for routes to update.
This is still invalid so as long as nothing happen it will not be solved.
RPKI Chain (Invalid)
https://rpki-validator.ripe.net/ui/46.233.44.0/23?validate-bgp=true
We're aware. IP provider has to update it, we're waiting.
I'm sorry teacher! it won't happen again I try to be a better student so I can impress some geek with my English skills
Until now there hasn't been any progress and solutions @VirMach for LAX2Z019, I haven't been able to use VPS on this node for about 3 weeks.
Operation Timed Out After 90001 Milliseconds With 0 Bytes Received
It died. I expect the data recovery got put off because of bigger fish to fry. It was also stated
I also am on LAX2Z019, but I have redundant data on a different VM, so I did not try contacting them for a temp replacement. So I am not really sure how that would go for you.
>
@FrankZ
thank you for helping answer. actually the last VPS was just installed OS and there wasn't any data yet, then the VPS was off and couldn't be used.
I'm confused now, there are more menus for contacting @VirMach , even the request menu for moving nodes can't be used.
I want to create a ticket, it always looks like the picture below, I'm confused
just opened 200 tickets about my services, hoping to speed up a resolution here
https://tenor.com/bGBAb.gif
Want free vps ? https://microlxc.net
denver and atlanta come online with old ip
I can SSH into following NYCB043 even though it is showing
Invalid RPKIhttps://rpki-validator.ripe.net/ui/141.11.212.0/24?validate-bgp=true
Can't SSH into following NYCB030 even though its
RPKIis valid!https://rpki-validator.ripe.net/ui/45.42.214.0/24?validate-bgp=true
Doing
nano /etc/network/interfacesshows that both VPS have similar configuration with new IPs. Interface iseth0Powerful AMD Ryzen VPS (aff)
My VM on NYCB015 that is.
I did
Reconfigure Networkingfrom SolusVM and now getting a different SSH errorConnection refusedPreviously I was getting error
Connection timed outPowerful AMD Ryzen VPS (aff)
NYCB021 (141.11.XX.XX) here. Routing seems to be completely established now, altough ping times from certain locations are still a bit funky. Atleast I can SSH into the box now
Ok It was my mistake. I was using wrong IP.
By the way does any one know how can I install Debian 12 minimal?
Powerful AMD Ryzen VPS (aff)
One of the options is direct upgrade from Debian 11.
nano /etc/apt/sources.list
apt-get update -y && apt-get upgrade -y
apt-get dist-upgrade -y
mount netboot.xyz and manually install it?
Damn you VirMach! Can you like have a bigger/longer outage so we can get +1 year for free on every VPS?!
This went kinda not bad for emergency migration - I hope other location you can get IP ranges already routed in advance and switch will be almost painless?
// 204.10.X.X seems to be fully routing now too
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
That was very easy. Took a few minutes.
Powerful AMD Ryzen VPS (aff)
Your IP xxx.xx.xx.xx has been banned
Ban Reason: Banned for 46 login attempts.
Ban Expires: 09/07/2023 (21:00)
Hello, Los Angeles Vps inaccessible, showing Operation Timed Out After 90001 Milliseconds With 0 Bytes Received? Why are there no failure reports?
@vgood said:
Generally if this occurs, you should not make a ticket and should check the network status page, but I've already reported this to our developer.
Our monitoring system is going crazy because of all the other stuff, I noticed LAX have an outage at Hivelocity for at least one server and it's on my queue but my queue is endless. I'll try to at least get it added to network status page soon.
I can't pay an invoice, get this error:
Is anyone faced it?
NY location is now with RoyaleHosting , is this an upgrade on dedipath?
I would say so, since they are operational and Dedipath is not.
I was asking more along the lines of their network stability/connectivity and ddos protection now with Royalehosting vs when Dedipath was in operation.
my NYCB040 node is alive, but the old data is not restored. Will it be restored? I actually want to do a fresh OS install while we are at this stage, but will it interfere with the ongoing process (if any)?
Psychz strikes again.
Routing issue for DALZ009 and DALZ006 appear to be caused by Psychz announcing these recently again for some reason, they've been sending us a ton of IP address change and of course invoices several times a month, I am guessing their techs just announced these anyway because it was on some other change list they were making. Trying to have it resolved, these should technically be online as well, just a coincidence.
I'd rather not take an extra year, but I want to spin the wheel for doubling the specs on my forever-free NVMe2G, but the chances shall be slightly in my favor after all the DeadPath stress.
For example, 69% chance of doubling to NVMe4G, 31% chance of having the server deleted instantly.
Two other providers offered me NVMe2G or SSD2G with price match, both with working IPv6.
Thus, having this IPv6less NVMe2G deleted at 31% chance is an acceptable risk.
We accept Karma donations for the last flan. 🍮 affbrr
@VirMach, so DALZ007 is good as it is? No I.P changes?