@Linux said:
Is anyone able to use netboot to do a reinstall? When I try it netboot downloads the ISO but then goes back to the initial ISO selection screen (I think it can't find the storage device).
I ran in to that. Can't remember if it was the version or what. I have notes on how I worked around it. I'll see if I can find them.
^ Yup, same here on a relatively recent re-install. I had to mess about with rescue, in order to partition properly. IIRC, it needed Virmach to make some change - perhaps a fresh netboot download.
[Edit for clarity.]
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural. It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
@Linux said:
Is anyone able to use netboot to do a reinstall? When I try it netboot downloads the ISO but then goes back to the initial ISO selection screen (I think it can't find the storage device).
I ran in to that. Can't remember if it was the version or what. I have notes on how I worked around it. I'll see if I can find them.
@Linux said:
Is anyone able to use netboot to do a reinstall? When I try it netboot downloads the ISO but then goes back to the initial ISO selection screen (I think it can't find the storage device).
I ran in to that. Can't remember if it was the version or what. I have notes on how I worked around it. I'll see if I can find them.
@Linux said:
Is anyone able to use netboot to do a reinstall? When I try it netboot downloads the ISO but then goes back to the initial ISO selection screen (I think it can't find the storage device).
I ran in to that. Can't remember if it was the version or what. I have notes on how I worked around it. I'll see if I can find them.
Anyone with NYCB028 having the same problem?
MY NYCB028 Node when accessed from virmach panel.
We cannot load the controls for your service at this time.
This could either mean:
A) It took too long to load. The server controls have been automatically disabled due to an anomoly.
C) The server could be offline, in which case we have already been notified.
I can access the IP via SSH, but can't login through it.
The hosted website is down.
@julensm said:
Anyone with NYCB028 having the same problem?
MY NYCB028 Node when accessed from virmach panel.
We cannot load the controls for your service at this time.
This could either mean:
A) It took too long to load. The server controls have been automatically disabled due to an anomoly.
C) The server could be offline, in which case we have already been notified.
I can access the IP via SSH, but can't login through it.
The hosted website is down.
1 vCPU Core
20 GB PURE SSD RAID-10 Storage
1 GB RAM
4000GB Monthly Premium Bandwidth
1Gbps Public Network Port
Full Root Admin Access
1 Dedicated IPv4 Address
KVM / SolusVM Control Panel - Reboot, Reinstall, Manage rDNS, & much more
Available in Multiple Locations
JUST $10.29/YEAR - WOW!!
During my personal usage, I had a positive experience with the VPS for only the first three months (even though I had purchased a two-year plan, but it's okay, it has expired now). The VPS was located in Japan, and the main issue was the frequent blocking of the IP by the GFW, even when I reinstalled the system. Although I rarely used this VPS, I did deploy a Baota panel on it to build a website, but unfortunately, it was inexplicably blocked by the GFW, so I gave up on that idea. Therefore, whenever I wanted to use this VPS, I had to set up port forwarding with another VPS to access it (which made me question the purpose of buying it altogether).
Additionally, my support tickets seemed to be neglected.
However, if there is a way to avoid being blocked by the GFW and if my support tickets receive attention and assistance, I would still be interested in purchasing your machines.
@caodaye said:
During my personal usage, I had a positive experience with the VPS for only the first three months (even though I had purchased a two-year plan, but it's okay, it has expired now). The VPS was located in Japan, and the main issue was the frequent blocking of the IP by the GFW, even when I reinstalled the system. Although I rarely used this VPS, I did deploy a Baota panel on it to build a website, but unfortunately, it was inexplicably blocked by the GFW, so I gave up on that idea. Therefore, whenever I wanted to use this VPS, I had to set up port forwarding with another VPS to access it (which made me question the purpose of buying it altogether).
Additionally, my support tickets seemed to be neglected.
However, if there is a way to avoid being blocked by the GFW and if my support tickets receive attention and assistance, I would still be interested in purchasing your machines.
It's better send Chinese government a ticket asking "Why my VPN blocked by GFW".
@taizi said:
anyone in tyoc040? virm status page shows running,but i can't open control panel at all
My VPS is running 040 node and it still can work.
weird...
already opened ticket 4 months ago and virmach never replied me,looks like the extra support I purchase just a toy
hope virmach can reply before invoice due date(06/21)
It looks like one of my VPSes on TYOC007 has gone offline with an unknown issue that has recurred several times since VirMach went to Tokyo for maintenance, ranging from a few days to a dozen days offline at a time, yet strangely enough another VPS on the same node has been fine.
@VirMach can you keep an eye on this issue when you have time?
finally, I managed to fix the server after 3 months
the issue: fix network does nothing in ubuntu 22.04, you need to edit the interfaces yourself
now I closed the ticket and opened the new ticket to request 2 months extension because my ticket got no reply for 2 months even I purchased priorityextra support(I realized it just the extra support)
and whats the point of migrate me from tyoc036 to tyoc040,I still getting random shutdown in 040,and status.virm.ac already not display mem usage,so that we can't see its 99% mem excellent epic oversold(although must be oversold in this price)
@taizi said: .. finally, I managed to fix the server ..
Basic stuff and should've been the first place that you looked. Shared hosting is cheap and more suited to someone with no sysadmin skills. Just saying. (Oh, and zero sympathy due to using Ubuntu on a server.)
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural. It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
@taizi said:
and whats the point of migrate me from tyoc036 to tyoc040,I still getting random shutdown in 040,and status.virm.ac already not display mem usage,so that we can't see its 99% mem excellent epic oversold(although must be oversold in this price)
@taizi said:
and whats the point of migrate me from tyoc036 to tyoc040,I still getting random shutdown in 040,and status.virm.ac already not display mem usage,so that we can't see its 99% mem excellent epic oversold(although must be oversold in this price)
Recent important VirMach emails went to spam in Gmail for me. Inconvenient. (I have >50 VirMach emails that passed through spam filter just fine, it was specifically these that got flagged.)
Recent important VirMach emails went to spam in Gmail for me. Inconvenient. (I have >50 VirMach emails that passed through spam filter just fine, it was specifically these that got flagged.)
its not Virmach specific issue. i have other emails gone to spam as well. seems like a Gmail problem
Recent important VirMach emails went to spam in Gmail for me. Inconvenient. (I have >50 VirMach emails that passed through spam filter just fine, it was specifically these that got flagged.)
its not Virmach specific issue. i have other emails gone to spam as well. seems like a Gmail problem
Recent important VirMach emails went to spam in Gmail for me. Inconvenient. (I have >50 VirMach emails that passed through spam filter just fine, it was specifically these that got flagged.)
its not Virmach specific issue. i have other emails gone to spam as well. seems like a Gmail problem
Is it just me or is it currently impossible to add TOTP 2FA to a Virmach account? I get a broken image icon instead of a QR code, and entering the key manually doesn't work either. I opened a ticket yesterday, got six "AI assistant" robo responses in less than an hour (they thankfully stopped after that) but no other response so far.
@willie said:
Is it just me or is it currently impossible to add TOTP 2FA to a Virmach account? I get a broken image icon instead of a QR code, and entering the key manually doesn't work either. I opened a ticket yesterday, got six "AI assistant" robo responses in less than an hour (they thankfully stopped after that) but no other response so far.
@willie said:
Is it just me or is it currently impossible to add TOTP 2FA to a Virmach account? I get a broken image icon instead of a QR code, and entering the key manually doesn't work either. I opened a ticket yesterday, got six "AI assistant" robo responses in less than an hour (they thankfully stopped after that) but no other response so far.
Comments
I ran in to that. Can't remember if it was the version or what. I have notes on how I worked around it. I'll see if I can find them.
^ Yup, same here on a relatively recent re-install. I had to mess about with rescue, in order to partition properly. IIRC, it needed Virmach to make some change - perhaps a fresh netboot download.
[Edit for clarity.]
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural.
It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
Here's my notes:
Boot the mounted netboot.xyz iso
Tried to open a ticket but their popup thing keeps loading forever:
But I guess it's again just 6 to 9 virtual servers stuck which will be resolved in 3-5 months.
dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/
Worked, thanks!
Excellent, am glad.
Anyone with NYCB028 having the same problem?
MY NYCB028 Node when accessed from virmach panel.
We cannot load the controls for your service at this time.
The server controls have been automatically disabled due to an anomoly.
This could either mean:
A) It took too long to load.
C) The server could be offline, in which case we have already been notified.
I can access the IP via SSH, but can't login through it.
The hosted website is down.
I don't know why I can't open the control panel on some of the VPS's I have running fine.
Probably because the node is down, that's why it keeps loading
It's running smoothly now
Hi @sh97 You've lost RackNerd's hidden deal on your lowend-deals page.
https://my.racknerd.com/cart.php?a=add&pid=810
1 GB KVM VPS (A Must Grab Deal) - LEB Exclusive
1 vCPU Core
20 GB PURE SSD RAID-10 Storage
1 GB RAM
4000GB Monthly Premium Bandwidth
1Gbps Public Network Port
Full Root Admin Access
1 Dedicated IPv4 Address
KVM / SolusVM Control Panel - Reboot, Reinstall, Manage rDNS, & much more
Available in Multiple Locations
JUST $10.29/YEAR - WOW!!
During my personal usage, I had a positive experience with the VPS for only the first three months (even though I had purchased a two-year plan, but it's okay, it has expired now). The VPS was located in Japan, and the main issue was the frequent blocking of the IP by the GFW, even when I reinstalled the system. Although I rarely used this VPS, I did deploy a Baota panel on it to build a website, but unfortunately, it was inexplicably blocked by the GFW, so I gave up on that idea. Therefore, whenever I wanted to use this VPS, I had to set up port forwarding with another VPS to access it (which made me question the purpose of buying it altogether).
Additionally, my support tickets seemed to be neglected.
However, if there is a way to avoid being blocked by the GFW and if my support tickets receive attention and assistance, I would still be interested in purchasing your machines.
It seems VirMach keeps a lot of customers, why?
I have >99.9% uptime (30d) on 3 of my 4 services. The 4th is at 95% right now.
It's better send Chinese government a ticket asking "Why my VPN blocked by GFW".
very cheap
I bench YABS 24/7/365 unless it's a leap year.
People stay with virmach because virmach offers some great products with 99.99%+ usability at low prices.
But they also randomly select some lucky users to enjoy products with 0% usability.
And @virmach can write very long posts.... when he can
blog archives
RYZE.LAX-Z0016.VMS OFF @VirMach
anyone in tyoc040? virm status page shows running,but i can't open control panel at all
My VPS is running 040 node and it still can work.
weird...
already opened ticket 4 months ago and virmach never replied me,looks like the extra support I purchase just a toy
hope virmach can reply before invoice due date(06/21)
B) The server controls have been automatically disabled due to an anomoly.anomoly
ano-moly
ano-molly
VirMach into anonymous drugs confirmed.
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
I should buy a Ryzen server
A Ryzen dedicated server.
None of my vps's on tyoc007 would open the control panel either, and more unfortunately one of them actually went offline.
It looks like one of my VPSes on TYOC007 has gone offline with an unknown issue that has recurred several times since VirMach went to Tokyo for maintenance, ranging from a few days to a dozen days offline at a time, yet strangely enough another VPS on the same node has been fine.
@VirMach can you keep an eye on this issue when you have time?
Thanks VirMach, my VPS on TYOC007 is back online and it's the fastest fix this year!
Why Virmach ignored my PM and wouldn't provide support @VirMach
It's been down and up and down for the past weeks.
finally, I managed to fix the server after 3 months
the issue: fix network does nothing in ubuntu 22.04, you need to edit the interfaces yourself
now I closed the ticket and opened the new ticket to request 2 months extension because my ticket got no reply for 2 months even I purchased priorityextra support(I realized it just the extra support)
and whats the point of migrate me from tyoc036 to tyoc040,I still getting random shutdown in 040,and status.virm.ac already not display mem usage,so that we can't see its 99% mem excellent epic oversold(although must be oversold in this price)
Basic stuff and should've been the first place that you looked. Shared hosting is cheap and more suited to someone with no sysadmin skills. Just saying. (Oh, and zero sympathy due to using Ubuntu on a server.)
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural.
It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
If the problem follows you ........
then I am the problem💀
Recent important VirMach emails went to spam in Gmail for me. Inconvenient. (I have >50 VirMach emails that passed through spam filter just fine, it was specifically these that got flagged.)
Virmach Email 2FA has problems,I can't receive their OPT code
its not Virmach specific issue. i have other emails gone to spam as well. seems like a Gmail problem
I bench YABS 24/7/365 unless it's a leap year.
Doesn't Gmail expect DMARC these days?
We need some old E3 at $25/m
My mistake. I mean $25/y
😂
Makes no difference Gmail is picky either way
The Yeti has left the building.
broken Email 2FA and need your help to disable it,please help me sir @VirMach
thank's @VirMach
RYZE.LAX-Z0016.VMS & RYZE.LAX-A006.VMS
running normally
hope there will be no more problems in the future
thank's
Any guesses on when @Virmach flys to New York? My VPS has been down for over 6 months.
Second Wednesday of next week
The Yeti has left the building.
Is it just me or is it currently impossible to add TOTP 2FA to a Virmach account? I get a broken image icon instead of a QR code, and entering the key manually doesn't work either. I opened a ticket yesterday, got six "AI assistant" robo responses in less than an hour (they thankfully stopped after that) but no other response so far.
I believe it has been "broken" for some time now.
The Yeti has left the building.
Oo it's a feature
i miss @FrankZ
hope he is having fun