NanoKVM | Free NAT KVM | Multiple Locations

1…457910…15

Comments

  • NeoonNeoon OGSenpai

    Fremont is still down, due to complications, the Node isn't booting.
    After chassis swap, with the old drives, one Drive was non longer reported and has been replaced.

    No ETA right now, they trying to get the Node back online, Raid 10 looks fine after drive replacement.

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • NeoonNeoon OGSenpai

    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Thanked by (2)bdl Ganonk

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • BrueggusBrueggus OG

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/

  • NeoonNeoon OGSenpai

    @Brueggus said:

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    Should be fixed.

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • BrueggusBrueggus OG

    @Neoon said:

    @Brueggus said:

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    Should be fixed.

    Thanks for looking into this! Autoconf works now but still no cigar:

    # ping6 2620:fe::fe
PING 2620:fe::fe(2620:fe::fe) 56 data bytes
^C
--- 2620:fe::fe ping statistics ---
13 packets transmitted, 0 received, 100% packet loss, time 11999ms

    dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/

  • NeoonNeoon OGSenpai

    @Brueggus said:

    @Neoon said:

    @Brueggus said:

    @Neoon said:
    Fremont is back Online, CPU and Memory Upgraded.
    Raid 10 still in sync, I/O performance will be a bit lower until synced up.

    Could you check if the network config on the node broke somehow? DHCP and IPv6 autoconfig don't work for me.

    I can get IPv4 to work if I configure static addresses but for IPv6 I don't get beyond the gateway:

    mtr --report --report-wide 2001:470:20::2
Start: Mon Jun  6 16:07:35 2022
HOST: xxxxxx Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- gateway             0.0%    10    0.2   0.2   0.2   0.2   0.0
  2.|-- ???                100.0    10    0.0   0.0   0.0   0.0   0.0

    Should be fixed.

    Thanks for looking into this! Autoconf works now but still no cigar:

    # ping6 2620:fe::fe
PING 2620:fe::fe(2620:fe::fe) 56 data bytes
^C
--- 2620:fe::fe ping statistics ---
13 packets transmitted, 0 received, 100% packet loss, time 11999ms

    Fixed, sorry for the issues.

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • BrueggusBrueggus OG

    @Neoon said:
    Fixed, sorry for the issues.

    No worries, thanks for maintaining this service for free!

    dnscry.pt - Public DNSCrypt resolvers hosted by LowEnd providers • Need a free NAT LXC? -> https://microlxc.net/

  • GanonkGanonk

    DE node has been renewed again :3

  • alvinalvin

    DE node reborn again? :o

  • NeoonNeoon OGSenpai
    edited June 2022

    @alvin said:
    DE node reborn again? :o

    No, likely the machine was suspended due to no payment, and this has been done yesterday. this happened several times.
    As said before, we don't do any new deployments, I will starting removing DE.

    Thanked by (1)Ganonk

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • NeoonNeoon OGSenpai

    Norway will be upgraded to 32GB Memory on Friday at 11:00 CEST.
    Expected Downtime about 5-10 minutes.

    Thanked by (2)flips Ganonk

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • NeoonNeoon OGSenpai

    The Panel is currently broken, no ETA, working on it.

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • NeoonNeoon OGSenpai

    @Neoon said:
    The Panel is currently broken, no ETA, working on it.

    Fixed, had some encoding issues after upgrading the database server.
    If you still see your Server status as unknown, please lemme now and I take a look.

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • ThomasPThomasP

    Hi my Norway issn't getting his ipv6 address anymore.
    also reboot doesnt fix it.

  • NeoonNeoon OGSenpai

    @ThomasP said:
    Hi my Norway issn't getting his ipv6 address anymore.
    also reboot doesnt fix it.

    We had a maintenance on NO, after the boot radvd did not came up properly, should be fixed.

    Thanked by (1)ThomasP

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • ThomasPThomasP

    @Neoon said:

    @ThomasP said:
    Hi my Norway issn't getting his ipv6 address anymore.
    also reboot doesnt fix it.

    We had a maintenance on NO, after the boot radvd did not came up properly, should be fixed.

    Yep working again thank you :)

  • NeoonNeoon OGSenpai

    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    Thanked by (1)Ganonk

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • szymonpszymonp

    @Neoon said:
    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    If I choose 2GB ram, it says that the memory configuration is invalid

  • GanonkGanonk

    @szymonp said:

    If I choose 2GB ram, it says that the memory configuration is invalid

    2 GB ram only DE node

  • NeoonNeoon OGSenpai

    @szymonp said:

    @Neoon said:
    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    If I choose 2GB ram, it says that the memory configuration is invalid

    Uh, we actually do input validation.
    Yea I changed the 2GB option, however I forgot to edit the actual validation.

    Will fix it.

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • szymonpszymonp

    @Neoon said:

    @szymonp said:

    @Neoon said:
    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    If I choose 2GB ram, it says that the memory configuration is invalid

    Uh, we actually do input validation.
    Yea I changed the 2GB option, however I forgot to edit the actual validation.

    Will fix it.

    also please look at my LET application, please don't forget this time xd

  • NeoonNeoon OGSenpai

    @szymonp said:

    @Neoon said:

    @szymonp said:

    @Neoon said:
    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    If I choose 2GB ram, it says that the memory configuration is invalid

    Uh, we actually do input validation.
    Yea I changed the 2GB option, however I forgot to edit the actual validation.

    Will fix it.

    also please look at my LET application, please don't forget this time xd

    Dude, you put the request in on a weekend!
    Don't be a dick.

    Thanked by (3)ralf Ganonk Ouji

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • MasonMason AdministratorOG

    @Neoon said:
    Dude, you put the request in on a weekend!
    Don't be a dick.

    No excuses. Also I demand an SLA and refunds for extended outages, I accept XMR and DOGE. A detailed RFO report needs to also be produced for any outages > 5 minutes. Kthxbai

    Thanked by (5)yoursunny flips Ganonk pikachu adly

    Head Janitor @ LES • About • Rules • Support

  • szymonpszymonp

    @Neoon said:

    @szymonp said:

    @Neoon said:

    @szymonp said:

    @Neoon said:
    NO and FM have been restocked, NL will follow later.
    As stuff got switched to cloud-init, the images have been updated too.

    If I choose 2GB ram, it says that the memory configuration is invalid

    Uh, we actually do input validation.
    Yea I changed the 2GB option, however I forgot to edit the actual validation.

    Will fix it.

    also please look at my LET application, please don't forget this time xd

    Dude, you put the request in on a weekend!
    Don't be a dick.

    Thank you for setting up, and sorry didn't mean of being rude

  • skorupionskorupion Services Provider

    550b8883e215cc0ff53ab90f7fa99089e18f0186

    For hosting a WP website (personal and tech blog)

    Crunchbits Technical Support, Technical Writer, and Sales
    Contact me at: +1 (509) 606-3569 or [email protected]

  • NeoonNeoon OGSenpai

    @skorupion said:
    550b8883e215cc0ff53ab90f7fa99089e18f0186

    For hosting a WP website (personal and tech blog)

    Deployed.

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • legolaslxlegolaslx

    19b65a1be364e52d3398939deb9c492a13587965

    For create V2Ray Server and test some applications. Thanks you.

  • NeoonNeoon OGSenpai

    @legolaslx said:
    19b65a1be364e52d3398939deb9c492a13587965

    For create V2Ray Server and test some applications. Thanks you.

    Thanks, no.

    Thanked by (5)_MS_ Advin Ganonk Erisa tototo

    Free NAT KVM | Free NAT LXC | Bobr
    ITS WEDNESDAY MY DUDES

  • AdvinAdvin Hosting Provider

    ee1074d5ff673b3413a9993eaf9553f841b8ccd0
    Interested in playing around with it. I'll most likely be running a couple of very small websites, and maybe also running an uptime monitor along with it :)

    I am a representative of Advin Servers

  • ehabehab

    @Advin said:
    ee1074d5ff673b3413a9993eaf9553f841b8ccd0
    Interested in playing around with it. I'll most likely be running a couple of very small websites, and maybe also running an uptime monitor along with it :)

    maybe Neoon has something from advinservers and him reading this is like :

Sign In or Register to comment.

© LowEndSpirit 2024

ipv6 ready