@cgkings said:
The offending person's machine has been deleted, but, why the non-offending person's machine is still pending
Just making a guess here, but I would expect that given the number of nodes that went down during the sale and are now back up, I would expect VirMach considered making sure existing VMs were working a priority over getting pending VMs provisioned. I and others also still have pending VMs so your not alone.
@cgkings said:
The offending person's machine has been deleted, but, why the non-offending person's machine is still pending
Just making a guess here, but I would expect that given the number of nodes that went down during the sale and are now back up, I would expect VirMach considered making sure existing VMs were working a priority over getting pending VMs provisioned. I and others also still have pending VMs so your not alone.
Thanks for your help. I'm relieved to know that I'm not the only one with a pending machine,
I agree to deal with the existing machine failure. Because of perspective-taking, I don't like my machine failure behind new users
@cgkings said:
The offending person's machine has been deleted, but, why the non-offending person's machine is still pending
666
It comes to my mind delayed activation granted ya a window of opportunity that ya could cancel it if grabbed better deal at next year's FS
if it is unprovisioned until next year's FS, you would have to factor in losses in opportunity costs for:
not being able to use VPS in 2023
what if you did not get any better deal in 2024 FS, then make a ticket after the FS for 2023 unprovisioned service , and still get cancelled anyway? not being able to use any FS VPS in 2024 then.
@cybertech said: if it is unprovisioned until next year's FS, you would have to factor in losses in opportunity costs for:
not being able to use VPS in 2023
what if you did not get any better deal in 2024 FS, then make a ticket after the FS for 2023 unprovisioned service , and still get cancelled anyway? not being able to use any FS VPS in 2024 then.
That's gross if appending more than 6 months even at VirmArch's level. My maximum expectation is 3 months.
@emengweb said: Have a fake 6.66, with same price, but lower Core & Ram & everything ;p
1C 1.8G 15G....
This one? Still is no brainer, just not at family heirloom level
@localhost said: It failed for text too. But again what is the correct sequence? Enter the kickstart url and then select a method of install?
I've just tested and look like it just won't work on boxes with smaller ram. The base install.img is like 700MiB which dracut will always fail to work with.
And the ks url seems doesn't work at all even when I tested on a vm with 4GiB ram. Not sure what could be the problem.
Sorry I have given you such unreliable info.
It's not unreliable info. Something worth trying out as the netboot.xyz portrays as such. Thanks for your help!
@cybertech said: if it is unprovisioned until next year's FS, you would have to factor in losses in opportunity costs for:
not being able to use VPS in 2023
what if you did not get any better deal in 2024 FS, then make a ticket after the FS for 2023 unprovisioned service , and still get cancelled anyway? not being able to use any FS VPS in 2024 then.
That's gross if appending more than 6 months even at VirmArch's level. My maximum expectation is 3 months.
@emengweb said: Have a fake 6.66, with same price, but lower Core & Ram & everything ;p
1C 1.8G 15G....
This one? Still is no brainer, just not at family heirloom level
Sure, but 2 Core is little better for k3s, high available version of Virmach
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural. It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
@localhost said: So, whats the difference between this and what you were suggesting earlier?
basically using qemu locally etc, you are just writing a image of the drive to transfer, rather than using the drive attached.
for resizing your partition, use parted print to fix the partition table, then parted /dev/vda resizepart THEPARTYOUWANT 100% then resize2fs /dev/vdaPART
@localhost said: So, whats the difference between this and what you were suggesting earlier?
basically using qemu locally etc, you are just writing a image of the drive to transfer, rather than using the drive attached.
for resizing your partition, use parted print to fix the partition table, then parted /dev/vda resizepart THEPARTYOUWANT 100% then resize2fs /dev/vdaPART
@VirMach just an FYI, that people are reporting not being able to get into SolusVM from the billing panel due to this error: Invalid vserverid or username
Nobody is rushing you or complaining. A couple of folks were able to give me a node and VM id so as to maybe make it easier for you to diagnose.
@emengweb said:
Sure, but 2 Core is little better for k3s, high available version of Virmach
i agree 2 core is fine but what work load will you deploy on <2GB - OS ram ?
Most master worker node has above 8G Ram of course, less 4g for some small thing.
Some light projects for self use, here is a list, these running on netcup for now. And some node running as my cdn node.
It's really fun for study and use these things
@FrankZ said: VirMach just an FYI, that people are reporting not being able to get into SolusVM from the billing panel due to this error: Invalid vserverid or username
Nobody is rushing you or complaining. A couple of folks were able to give me a node and VM id so as to maybe make it easier for you to diagnose.
I don't have the problem on any of my VMs, I just consolidated the list so there was not multiple people tagging VirMach for the same thing over five pages.
I don't have the problem on any of my VMs, I just consolidated the list so there was not multiple people tagging VirMach for the same thing over five pages.
I sincerely hope Virmach's sanity still remain intact after dealt with the congested tickets day and night
@FrankZ said:
@ VirMach just an FYI, that people are reporting not being able to get into SolusVM from the billing panel due to this error: Invalid vserverid or username
Nobody is rushing you or complaining. A couple of folks were able to give me a node and VM id so as to maybe make it easier for you to diagnose.
@Jab said:
Hey I don't want to sounds like that guy... but many of those posts above clearly need a dedicated topic - there is some nice knowledge there that shouldn't be buried deep deep in VirMach bus spam :-)
// Flagged for mods.
I am back now and will split this out into it's own thread directly.
Actually, on second though it would be a lot cleaner if @dgc1980 would open a new thread in the help category and copy pasta the relevant parts of the process.
@dgc1980 do you want to do a thread on this or do you want me to split it off ?
EDIT: @localhost conversation about installing Alma 9 on low RAM VM has been spit off to to a new thread in the Help section.
@Jab said:
Hey I don't want to sounds like that guy... but many of those posts above clearly need a dedicated topic - there is some nice knowledge there that shouldn't be buried deep deep in VirMach bus spam :-)
// Flagged for mods.
I am back now and will split this out into it's own thread directly.
Actually, on second though it would be a lot cleaner if @dgc1980 would open a new thread in the help category and copy pasta the relevant parts of the process.
@dgc1980 do you want to do a thread on this or do you want me to split it off ?
I did not start the discussion, it was localhost, so it is for him
Comments
FFME002 back online
failed Jan 4 07:40 Restored Jan 9 03:22
Plus a number of other nodes.
Get your FREE VPS if you develop Open Source software
The offending person's machine has been deleted, but, why the non-offending person's machine is still pending
Just making a guess here, but I would expect that given the number of nodes that went down during the sale and are now back up, I would expect VirMach considered making sure existing VMs were working a priority over getting pending VMs provisioned. I and others also still have pending VMs so your not alone.
there are way too many offending people services to delete and many machine to troubleshoot at the same time
I bench YABS 24/7/365 unless it's a leap year.
Cloudcone | Crunchbits | Dartnode | Dedirock | Georgedatacenter | Gigahost | Hostbilby | Host-c | Hostdzire | Hostsailor | Namecrane | Nuyek | Realtoxmedia | Servarica | Terabit | Tnahosting | Virmach
Thanks for your help. I'm relieved to know that I'm not the only one with a pending machine,
I agree to deal with the existing machine failure. Because of perspective-taking, I don't like my machine failure behind new users
Ontario Dildo Inspector
666
I bench YABS 24/7/365 unless it's a leap year.
Yay!!
New NVME Roulette time.
https://microlxc.net/
It comes to my mind that delayed activation granted ya a window of opportunity for cancellation if grabbed better deal at next year's FS
Only $1.11 and $2.22 the meme level no brainer could beat $6.66 the family heirloom level, I double doubt I could get it through
Ontario Dildo Inspector
if it is unprovisioned until next year's FS, you would have to factor in losses in opportunity costs for:
I bench YABS 24/7/365 unless it's a leap year.
Have a fake 6.66, with same price, but lower Core & Ram & everything ;p
1C 1.8G 15G....
That's gross if appending more than 6 months even at VirmArch's level. My maximum expectation is 3 months.
This one? Still is no brainer, just not at family heirloom level
Ontario Dildo Inspector
It's not unreliable info. Something worth trying out as the netboot.xyz portrays as such. Thanks for your help!
Sure, but 2 Core is little better for k3s, high available version of Virmach
@VirMach Can you send me a server? I'm a student,I am from china.
Like millions of others, then.
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural.
It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
i agree 2 core is fine but what work load will you deploy on <2GB - OS ram ?
Shhh, don't wake up his daydream
Ontario Dildo Inspector
how is it dangling today ?
Ya know, just fingered out sometimes silence is a virtue
I suppose that's why VirmAch is playing dead
Ontario Dildo Inspector
If your server is "pending": Wait!
If you have not bought anything: Buy!
hey @Virmach ...
this should wake him up.
Squeeze VirmAch harder
Ontario Dildo Inspector
Just post your mailing address and he'll put it in an envelope for you.
I miss my vps. :'(
I'm also getting the 'Invalid vserverid or username' error while trying to access SolusVM
node: FFME004
id: 685479
Contribute your idling VPS/dedi (link), Android (link) or iOS (link) devices to medical research
Thanks, seems I have xfs and these are for ext4? Ill need to do some more reading
seems
xfs_growfs /did the trick, directly on the luks enabled systemHonestly, I am surprised and kinda thinking... is this it? Just 1 command and all looks good (even after restart)?
Or I am in a dream
Someone can provide some clarity on this, it will be great. Thanks
For the issue of
Invalid vserverid or usernamemy node is SEAZ008Hey you! Yeah you! I been looking for you, where are my socks? Hey don't act you don't know me, come back here and gimme my socks!
The Yeti has left the building.
I assure you that they are both incredibly comfortable and incredibly still mine.
Then why they all sloppy on you? Cause they fit my bigfoots that is why, so gimme my socks.
The Yeti has left the building.
I know what people on LES do with socks. They're staying with me.
@VirMach just an FYI, that people are reporting not being able to get into SolusVM from the billing panel due to this error:
Invalid vserverid or usernameNobody is rushing you or complaining. A couple of folks were able to give me a node and VM id so as to maybe make it easier for you to diagnose.
Node: FFME004 - id: 685479
Node: FFME004 - id=685483
Node: LAXA018 - Id=685587
Node: SEAZ005 - id=685399
Node: SEAZ008 - Id=unk
Most master worker node has above 8G Ram of course, less 4g for some small thing.
Some light projects for self use, here is a list, these running on netcup for now. And some node running as my cdn node.
It's really fun for study and use these things
It would be hilarious if ya're on the naughty list
Ontario Dildo Inspector
I don't have the problem on any of my VMs, I just consolidated the list so there was not multiple people tagging VirMach for the same thing over five pages.
I sincerely hope Virmach's sanity still remain intact after dealt with the congested tickets day and night
Ontario Dildo Inspector
which node is this? i have one in TYO so this make me jumps
Fuck this 24/7 internet spew of trivia and celebrity bullshit.
TYOC036.
I submit, daddy VirMach! Don't make me beg for it
yabs daddy
Just patiently waiting to idle my dollah box.
In the meantime, I'll be a good SubmissiveResponsible boy.
yabs daddy
Mine on DALZ003 has same error, but since before it was migrated to Ryten.
SEAZ005 = 685399
@dgc1980 do you want to do a thread on this or do you want me to split it off ?
EDIT: @localhost conversation about installing Alma 9 on low RAM VM has been spit off to to a new thread in the Help section.
Yo boss, since yo got at least a dedi, wat's yor biz with Virmach FS?
Ontario Dildo Inspector
I did not start the discussion, it was localhost, so it is for him