VirMach
VirMach
About
- Username
- VirMach
- Joined
- Visits
- 2,907
- Last Active
- Roles
- Member
- Thanked
- 9502
Comments
-
(Quote) This was supposed to be a quick migration but QuadraNet has been nullrouting our IP addresses all day for doing the transfers. I guess their DDoS protection is some script they set up to deny you service, the 14 year old developer must have …
-
Side note on multi-IP, at this point it's going to require a lot of work to sort through all of it and that's after we set up more nodes. Multi-IP will most likely for most people require another migration as well. Originally this wasn't going to be…
-
(Quote) Bottom of the list at this point to be frank. I understand it's very important to some, we just have to make sure people have a functional service first, a functional IP second, that the networking actually functions well, more builds, coord…
-
Template Syncs - Ongoing, many more re-synced. OS installs should work better. QuadraNet's "DDoS Protection" is essentially just hefty false positives though so for Los Angeles I might have to literally drive down a hard drive and load the…
-
Networking Update - Just essentially waiting on DC hands at this point for NYC, Dallas, Atlanta, San Jose, Seattle, Phoenix, and Denver. Once these switch over networking should improve drastically and it should also have a positive impact on the CP…
-
(Quote) We're ramping up the abuse script. It's what it is called. I didn't say boot loop after migrating is abuse. Abuse script will just power it down, not suspend. I don't see the harm in powering down something stuck in a boot loop. I was just …
-
(Quote) Were these always offline after Ryzen Migrate button?
-
(Quote) This has an issue with a software getting stuck and duplicating its process over and over until it overloads and we have to reboot it. We made some changes, if it happens again we'll try to catch it earlier this time to avoid a reboot.
-
Settings stuck on FFME004 but I'm pretty sure I've said that once before. There's zero information on this but there's been constant kernel bugs regarding these fixes on Linux. I can't rewrite the Linux kernel right now so until Linux figures out ho…
-
(Quote) FFME004, we found ECC error, and the settings also dropped off again. Memory swap fixed FFME004, we couldn't send out migration emails in time because xTom worked very quickly to get this replaced. The setting drop-off caused a disk to drop …
-
(Quote) I'll make a network status page for it since it seems a lot of the emails failed to send.
-
(Quote) Well initially the way it's going to work is there will be a period of time where you're allowed to "Ryzen Migrate" to your desired location (without data) as everyone lands in their desired location. It'll be announced here and on…
-
We're ramping up the abuse script temporarily. If you're at around full CPU usage on your VPS for more than 2 hours, it'll be powered down. We have too many VMs getting stuck on OS boot and negatively affecting others at this time, due to the operat…
-
(Quote) I understand, I'm just adding onto it that I agree with you and it's not user friendly and I'm also saying that unfortunately our current situation is similar and also not how we intended for it to be coded by the developer. I did read what …
-
(Quote) I agree with you on this. We didn't really have another choice for these. It's painful and bad, for us as well. There are probably 5% of people that have been stuck for 48 hours now and I don't like that but we're doing all we physically can…
-
(Quote) Unfortunately there's pretty much nothing we can do about that really. I really think SolusVM did some updates to that tool and broke it for older operating systems recently. They've been breaking a lot of things, like libvirtd incompatibili…
-
(Quote) Finally got an important setting to stick on this one.
-
(Quote) Good to hear Tokyo calmed down a bit, at least on a single server.
-
Some observations about the network, and ARP packets. We kind of spoke about this on OGF but I'm tired of going back there for now, so I'm providing a continuation of it here. These seem to happen whenever more than one subnet is on the same VLAN, …
-
(Quote) Those have the whacky names because I'm an idiot and wanted to call them "NYCM" as in "M" for "Migrate" or something, because we set up the naming scheme before we verified some details about the servers, but mu…
-
(Quote) FFME006 should be fine I think, if yours is down it may be unrelated. FFME005, I don't remember, but FFME004 definitely had an issue. Worked on them an hour or so ago and updated the BIOS settings to match Tokyo which has similar disks and n…
-
In the meantime all Ryzen nodes are getting a final sync of netboot.xyz to make sure that at least works as an option.
-
(Quote) OS templates may have ran into issue for LAX since they were interrupted by the network issue we faced, and then interrupted again with mass migrations. I'll put in another sync soon.
-
Ryzen migrate button will be converted to Ryzen to Ryzen location change button by around the end of this week.
-
(Quote) Miami will be the next thing to be worked on, sometime this week. I do believe our schedule will open back up and we'll also be focusing on returning support response times to normal.
-
Bulk of migrations are complete to some level, with a lot of problems. FFM is still facing disk configuration issue, I couldn't get to it, but luckily only a small number of people are affected outside of FFME04 which rebooted into no disks, and pot…
-
All migrations ran into pretty much every problem they could with every step of the way. All nodes are going to unfortunately have negatively affected VMs but we're working hard to continue to make sure the majority are functional and we're definite…
-
(Quote) A lot of things just end up taking a long time not because they would take a long time to do but because it's difficult to work it into the schedule without the rest of the day falling apart. But yes, walking is faster than taking a car, I j…
-
(Quote) My current node expires on July 05. I'll try to work in time to set up a node here for you. It's all there, it just needs to be configured. Assuming the node doesn't just die on first boot. (Quote) Yeah, it's been rough. We've had our fair…
-
(Quote) SolusVM isn't broken on it. I haven't had a chance to fix it since it's lower down the priority list since the node is actually online as you mentioned. Controls will be broken though so anyone's VM that's offline because of a reboot or othe…
-
(Quote) We're already in a halfway state there. There's probably three phases of old nodes: * Big VLAN, mixed /24 subnets. * Big VLAN, separated /24 subnets with mixed gateway. * Big VLAN, separated /24 subnets and separated gateways. We already s…
-
Frankfurt almost ready. This will be the first location that I'm trying to launch properly. There's two servers that have potential issues and will be skipped, two that got lost as previously mentioned so there's going to be five servers launched h…
-
(Quote) Honestly I have a lot of notes all over the place and a lot of servers and parts going everywhere right now and don't remember that specifically but I don't remember that one as having NIC issue. I'd have to take a look at everything and sch…
-
(Quote) Ran into further issues. Busy two days or so, another node went offline and it's been having RAID controller issues, the storage node took up a good amount of time as many other things, a lot going on in the background. Sorry for lack of upd…
-
(Quote) Frankfurt is about to be ready. Everything basically ended up getting shifted a week forward because time flies when you're having fun and we here at VirMach are just having a blast. UPS is being absolutely abysmal there. Even worse than I …
-
(Quote) A lot of these servers never were set up due to motherboard issues. We have to make another rounds of fixing them with specific BIOS/BMC updates that involve moving PCIe cards off and back on. More will be available when that's completed.
-
(Quote) I bought the lube and it just spilled all over the office floor. It's such good lube that if you leave it tilted on the floor long enough it self lubes the cap and starts leaking lube.
-
(Quote) Nope, no idea what to do with those. I'll probably have to go to Tokyo and grab them myself. DC hands rate is insane there.
-
I just remembered our 4TB drives are all mixed with non-XPG and in heatsinks unlabeled. I'll do a few of those but most will be 2TB Gen4 since they're all labeled and I don't feel like sorting through everything right now. These should theoretically…
-
(Quote) As much as I personally hate USPS, at least in our area, I'm using USPS first class for all of them due to cost. Around $130 to ship them all versus like $1000 since they're mostly international. They wouldn't allow 4x4x1 box, at least on th…