AMS26 AMS29 i managed to boot after rebooting may times but if i restart the OS now one time it is stuck again on the above screen.
We had the same on NY15 you fixed it there so i assume it is the same issue on the AMS machines.
@VirMach said: Just letting you guys know that I'm capable of seeing posts the first time around, and definitely much less capable of seeing or addressing them the 3rd, 4th, or 5th time it is mentioned by the same person in a short period of time.
If you just say anything about it people know you have seen it , ignoring it is asking for people to ask again if you have seen it.
@hike do you have a ticket? If you don't then make one by now it'd be more convenient than sending messages here like this, if you do then give me your ticket ID.
@hike said: @VirMach my experience with tickets was quite bad in the past and solutions are much better in the Forum(s).
I created a ticket ID #296501
I don't know what's going on with these so far, I don't know if your Windows was mid-update while it powered off or what but it doesn't seem like it's a VM issue, more likely OS related. I haven't looked into it yet just took a glance, letting you know ahead of time so you can proceed accordingly with any solutions you can possibly do on your end so we don't waste any time. My reply will probably take a few days.
Ok , i have the same when booting from cdrom with windows. We had the same a few days ago in New York (NY15) after the fire. You fixed that fast, anyway i wait till you have time to take a look.
@hike said:
Ok , i have the same when booting from cdrom with windows. We had the same a few days ago in New York (NY15) after the fire. You fixed that fast, anyway i wait till you have time to take a look.
Do you mean NY14? That one you replied something then closed it. And all I did was link you knowledgebase article regarding ISO being unmounted. In this case I don't see an ISO mounted, not sure if you changed some other settings? Well now it's mounted, I'll let you work on it maybe you remembered what was done before.
Checking logs I see you did a lot o changes to that one, lots of spamming every single button available on the control panel so I really don't know what you did then or this time around. Whatever "fixed" it or broke it was probably not related to anything we did on our end.
@Virmach if i boot from the ISO you provide in the list and boot the host goes off directly.
There is really not much i can do , i can't even reinstall. Let's wait till you have time.
@hike said: if i boot from the ISO you provide in the list and boot the host goes off directly.
if you are booting a windows ISO, you need to "press any key to boot from CD" in VNC, otherwise in a few seconds it will boot HDD again and give you an error. you may need to ctrl+alt+del to reboot again and quickly press it next boot, it will take you a few times if you do not know how to do it.
@hike said: if i boot from the ISO you provide in the list and boot the host goes off directly.
if you are booting a windows ISO, you need to "press any key to boot from CD" in VNC, otherwise in a few seconds it will boot HDD again and give you an error. you may need to ctrl+alt+del to reboot again and quickly press it next boot, it will take you a few times if you do not know how to do it.
Hi, yes thanks i am aware of that.
If i boot from a ISO , it start loading the files and few seconds later the VM is shutdown and offline.
I experienced this before on different hosts, but some of them suddenly boot normal after many tries, but if you have a complete node crash or power failure the process start again, stuck on boot, press ctrl alt del many times, and see if you are lucky it boot.
Weird stuff , and this is Windows only all linux related VM's are fine so maybe driver related with the node.
since this is a Windows only issue, and support on flash sales are extremely limited to basically hardware failures only and a reinstall should fix this.
if VirMach is to fix this, it would require priority support at a fee
since this is a Windows only issue, and support on flash sales are extremely limited to basically hardware failures only and a reinstall should fix this.
if VirMach is to fix this, it would require priority support at a fee
If i was capable to reinstall i would already do this, because save me lot of time. But it is not possible. As explained above.
I experience this on multiple nodes, regardless if it was a flash sale or not. I can't be the only one experiencing this on NY and multiple AMS nodes.
And paying extra for some support no problem, or having extra patience because it was a flash sale. I just think it is important @virmach knows the problem is there.
Whenever they have time they take look and hopefully find the issue.
This ticket was created to notify you of an upcoming change with your service. We will be changing your server's main IP address and additional IP addresses on Thursday, July 20.
Old IP address(es): 45.X.X.X
New IP address(es): 47.X.X.X
We recommend performing the IP change yourself to make the transition as smooth as possible. To do so, please navigate to your server's "full VPS control panel", click the "Network" tab, and click the "Set as Main IP Address" button next to the newly added IP address. When you have confirmed that the new IP address has been set as your main IP address, click the "Re-configure Networking" button to configure the new IP address(es) to your server. Note that clicking this button will reboot your server multiple times and will take between 5-10 minutes to complete.
If the newly added IP address(es) are NOT pinging on your server by the time the changes are scheduled to occur, we will be automatically re-configuring your server's networking without any prior warning. This will result in around 5-10 minutes downtime and the complete removal of your old IP address. If your server is already pinging then we will simply remove the old IP address and leave your server running as is.
Thanks,
VirMach Support
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
@Jab said:
New IP saga continues [at least in NY].
Dear VirMach Customer,
This ticket was created to notify you of an upcoming change with your service. We will be changing your server's main IP address and additional IP addresses on Thursday, July 20.
Old IP address(es): 45.X.X.X
New IP address(es): 47.X.X.X
We recommend performing the IP change yourself to make the transition as smooth as possible. To do so, please navigate to your server's "full VPS control panel", click the "Network" tab, and click the "Set as Main IP Address" button next to the newly added IP address. When you have confirmed that the new IP address has been set as your main IP address, click the "Re-configure Networking" button to configure the new IP address(es) to your server. Note that clicking this button will reboot your server multiple times and will take between 5-10 minutes to complete.
If the newly added IP address(es) are NOT pinging on your server by the time the changes are scheduled to occur, we will be automatically re-configuring your server's networking without any prior warning. This will result in around 5-10 minutes downtime and the complete removal of your old IP address. If your server is already pinging then we will simply remove the old IP address and leave your server running as is.
Thanks,
VirMach Support
Not just NYJ ... I just got one for an Atlanta box.
@skorous said: Not just NYJ ... I just got one for an Atlanta box
I got new ones on both of my ATL boxes, one is a Alibaba subnet, the other is a D-Digital LLC
@VirMach, just out of curiosity, you mentioned that ARIN or RIPE (forget what one) offered you a free block of IP address if you supplied your customers details, what if you sent out a email to customers offering these as a permanent IP option if they opt-in to share their information, I am sure that most customers will not mind.
load 1300 on status, CPU going brrrrrrrrrrrrrrrrrrrrrrrr
--
I've opened priority emergency ticket... I've met VirBot AI Assistant.
AI generated answer, totally useless.
Fuck me, I hate this, but I totally understand this approach - I guess many tickets gonna be resolved this way
VirBot did not fix FFME02, we need VirBot_v2.
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
@Jab said: AI generated answer, totally useless.
Fuck me, I hate this, but I totally understand this approach - I guess many tickets gonna be resolved this way
VirBot did not fix FFME02, we need VirBot_v2.
I've tried to make it less annoying by basically making it appear as if it's just some advisory little note that appears on the ticket that can be ignored but I could see how it's annoying with it emailing you and it also randomly appearing afterward. It'd be nice if it could be generated realtime like it takes you over to the ticket and the AI starts typing its answer or how I wanted to do it once we implement it ourselves, have it answer you before you even make the ticket.
@Jab said:
FFME02 is back, but a lot of steal - something went wrong with auto-start of VPSes/abuse or it's like verifying filesystem in background?
update on this: CPU seems lower now, still higher than before thing-that-happend, but much much lower.
VMs are not accessible via WHMCS/SolusVM - Operation Timed Out After 90001.
status webpage still have no updates/ping from FFME002.
@VirMach said:
We could replace it with a static icon that looks like this instead, let me know.
I will counter: remove padding-left:10px; from class="progress-bar progress-bar-success" [and from the p below showing text % usage] to make it work like it should
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
@Jab said: I will counter: remove padding-left:10px; from class="progress-bar progress-bar-success" [and from the p below showing text % usage] to make it work like it should
It is nice when someone actually offers a solution to correct the issue, kudos.
@Jab said: I will counter: remove padding-left:10px; from class="progress-bar progress-bar-success" [and from the p below showing text % usage] to make it work like it should
Okay I'm only doing it because I think it'll be funny, I've pushed out this update. Let me know what to try next. We're going to play break the client area simulator, it's the gameshow where we change the code to what should make sense but doesn't because the entire page is probably wrong in some minor way from the start.
(edit) Nevermind my OCD can't stand it, for reference this was the result
There, I found a middle ground. Just to annoy everyone though if you hover over the sliver of used data it will display the percentage now, but if it's close to 0% it will be difficult to hover over it since it no longer has the 10 padding.
@KuYeHQ said:
Damn it, wrong wrong wrong traffic statistics suspended my Tokyo vps
Ticket and it'll be handled. I have no idea what happened there, SolusVM has been weird lately with everything. That goes for FFME002 too (@Jab), I fixed this the other day for some other node but forgot, it's a very specific thing that needs to get done to get it to work. Not about to spend an hour trying to remember it though.
On a Chicago node (CHIZ001 in particular ), anyone else have an issue booting netboot.xyz, from mounting the ISO? For me, it struggles to auto-configure the network, from the detected MAC address. When manually entered, to select an ISO (Alma 8/Centos 7), netboot just loops back to not configuring the network.
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural. It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
@AlwaysSkint said:
On a Chicago node, anyone else have an issue booting netboot.xyz, from mounting the ISO? For me, it struggles to auto-configure the network, from the detected MAC address. When manually entered, to select an ISO (Alma 8/Centos 7), netboot just loops back to not configuring the network.
You might want to specify the exact node name, it doesn't go by specific clusters or anything like that or at least it shouldn't in terms of IP blocks, ISO, and so on. I already have a list on my end of all the nodes that need ISO cleanup but this sounds like it might be something else. I've seen it happen before though, whatever you're describing. I never got to check back to see if it the problem went away with a resync or if it's related to the VM configuration.
@KuYeHQ said:
Damn it, wrong wrong wrong traffic statistics suspended my Tokyo vps
Ticket and it'll be handled. I have no idea what happened there, SolusVM has been weird lately with everything. That goes for FFME002 too (@Jab), I fixed this the other day for some other node but forgot, it's a very specific thing that needs to get done to get it to work. Not about to spend an hour trying to remember it though.
@VirMach said: You might want to specify the exact node name..
Had edited to add it, just a few minutes later (after I checked).
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural. It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural. It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
@dinhvanlocitvn said:
My ticket #733438 Subject: IPv6 Request - DALZ003
on hold from 07/07/2023 (07:35). Please help me check it. Thank VirMach !
I don't expect that IPv6 is currently available in Dallas. I have only seen IPv6 in Tokyo, and Frankfurt, and maybe some in Amsterdam. Although I have had an ticket in for Amsterdam IPv6 since 31 March, so maybe not available in Amsterdam anymore. I'm just saying don't get your hopes up.
Comments
just tried again and fio works, even though it failed twice in the past 24hours or so.
do you still wanna have a look or just let it be?
I bench YABS 24/7/365 unless it's a leap year.
@VirMach I can't boot on AMS25
AMS26 AMS29 i managed to boot after rebooting may times but if i restart the OS now one time it is stuck again on the above screen.
We had the same on NY15 you fixed it there so i assume it is the same issue on the AMS machines.
If you just say anything about it people know you have seen it , ignoring it is asking for people to ask again if you have seen it.
Let me know if it's fixed for you.
@hike do you have a ticket? If you don't then make one by now it'd be more convenient than sending messages here like this, if you do then give me your ticket ID.
Wait, you have Windows on your VPS?
@VirMach my experience with tickets was quite bad in the past and solutions are much better in the Forum(s).
I created a ticket ID #296501
Yes, if you buy it with windows you get windows.
You never experienced the "VIRMACH FLASH SALE" ?
Then you missed a lot of fun.
It works!
NYCB028 IP routing is back online
Yeah I know I tried telling them, but whatever they did it looks like it might be pinging.
Nah, it's okay now - it works. (I pushed "post comment" button too fast and then updated/edited this post above).
I don't know what's going on with these so far, I don't know if your Windows was mid-update while it powered off or what but it doesn't seem like it's a VM issue, more likely OS related. I haven't looked into it yet just took a glance, letting you know ahead of time so you can proceed accordingly with any solutions you can possibly do on your end so we don't waste any time. My reply will probably take a few days.
Ok , i have the same when booting from cdrom with windows. We had the same a few days ago in New York (NY15) after the fire. You fixed that fast, anyway i wait till you have time to take a look.
Do you mean NY14? That one you replied something then closed it. And all I did was link you knowledgebase article regarding ISO being unmounted. In this case I don't see an ISO mounted, not sure if you changed some other settings? Well now it's mounted, I'll let you work on it maybe you remembered what was done before.
Checking logs I see you did a lot o changes to that one, lots of spamming every single button available on the control panel so I really don't know what you did then or this time around. Whatever "fixed" it or broke it was probably not related to anything we did on our end.
@Virmach if i boot from the ISO you provide in the list and boot the host goes off directly.
There is really not much i can do , i can't even reinstall. Let's wait till you have time.
if you are booting a windows ISO, you need to "press any key to boot from CD" in VNC, otherwise in a few seconds it will boot HDD again and give you an error. you may need to ctrl+alt+del to reboot again and quickly press it next boot, it will take you a few times if you do not know how to do it.
Hi, yes thanks i am aware of that.
If i boot from a ISO , it start loading the files and few seconds later the VM is shutdown and offline.
I experienced this before on different hosts, but some of them suddenly boot normal after many tries, but if you have a complete node crash or power failure the process start again, stuck on boot, press ctrl alt del many times, and see if you are lucky it boot.
Weird stuff , and this is Windows only all linux related VM's are fine so maybe driver related with the node.
since this is a Windows only issue, and support on flash sales are extremely limited to basically hardware failures only and a reinstall should fix this.
if VirMach is to fix this, it would require priority support at a fee
If i was capable to reinstall i would already do this, because save me lot of time. But it is not possible. As explained above.
I experience this on multiple nodes, regardless if it was a flash sale or not. I can't be the only one experiencing this on NY and multiple AMS nodes.
And paying extra for some support no problem, or having extra patience because it was a flash sale. I just think it is important @virmach knows the problem is there.
Whenever they have time they take look and hopefully find the issue.
Woah, I used like 25% of my bandwidth already!?
almost...
Nice scaling there
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
New IP saga continues [at least in NY].
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
Not just NYJ ... I just got one for an Atlanta box.
I got new ones on both of my ATL boxes, one is a Alibaba subnet, the other is a
D-Digital LLC@VirMach, just out of curiosity, you mentioned that ARIN or RIPE (forget what one) offered you a free block of IP address if you supplied your customers details, what if you sent out a email to customers offering these as a permanent IP option if they opt-in to share their information, I am sure that most customers will not mind.
It might be time for the vendor to implement DHCP. I'm not entirely joking.
Dataplane.org's current server hosting provider list
You're of the understanding they don't already?
[root]# grep BOOTPROTO ifcfg-ens3
BOOTPROTO=dhcp
FFME02 says: send help.
load 1300 on status, CPU going brrrrrrrrrrrrrrrrrrrrrrrr
--
I've opened priority emergency ticket... I've met VirBot AI Assistant.
AI generated answer, totally useless.
Fuck me, I hate this, but I totally understand this approach - I guess many tickets gonna be resolved this way
VirBot did not fix FFME02, we need VirBot_v2.
Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
Trick or Tokyo
Ontario Dildo Inspector
@VirMach
I opened a ticket, please take the time to help me deal with it, thank you
FFME02 is back, but a lot of
steal- something went wrong with auto-start of VPSes/abuse or it's like verifying filesystem in background?Haven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
I've tried to make it less annoying by basically making it appear as if it's just some advisory little note that appears on the ticket that can be ignored but I could see how it's annoying with it emailing you and it also randomly appearing afterward. It'd be nice if it could be generated realtime like it takes you over to the ticket and the AI starts typing its answer or how I wanted to do it once we implement it ourselves, have it answer you before you even make the ticket.
Let me know if you have any suggestions.
Received ticket for IP change on my NYCB036 VM. Removed the old IPv4, added the new IPv4, no issues.
We could replace it with a static icon that looks like this instead, let me know.
update on this: CPU seems lower now, still higher than before thing-that-happend, but much much lower.
VMs are not accessible via WHMCS/SolusVM - Operation Timed Out After 90001.
status webpage still have no updates/ping from FFME002.
I will counter: remove
padding-left:10px;fromclass="progress-bar progress-bar-success"[and from the p below showing text % usage] to make it work like it shouldHaven't bought a single service in VirMach Great Ryzen 2022 - 2023 Flash Sale.
It is nice when someone actually offers a solution to correct the issue, kudos.
Damn it, wrong wrong wrong traffic statistics suspended my Tokyo vps
Yo @VirMach
Tokyo or Tick
Ontario Dildo Inspector
Okay I'm only doing it because I think it'll be funny, I've pushed out this update. Let me know what to try next. We're going to play break the client area simulator, it's the gameshow where we change the code to what should make sense but doesn't because the entire page is probably wrong in some minor way from the start.
(edit) Nevermind my OCD can't stand it, for reference this was the result
There, I found a middle ground. Just to annoy everyone though if you hover over the sliver of used data it will display the percentage now, but if it's close to 0% it will be difficult to hover over it since it no longer has the 10 padding.
Ticket and it'll be handled. I have no idea what happened there, SolusVM has been weird lately with everything. That goes for FFME002 too (@Jab), I fixed this the other day for some other node but forgot, it's a very specific thing that needs to get done to get it to work. Not about to spend an hour trying to remember it though.
Something something virtfusion.
Looks desperately pathetic, jus' hire a proper frontend dev to end this misery
Ontario Dildo Inspector
Okay let me just raise everyone's prices to hire a front end developer full-time to make minor changes to the CSS.
On a Chicago node (CHIZ001 in particular ), anyone else have an issue booting netboot.xyz, from mounting the ISO? For me, it struggles to auto-configure the network, from the detected MAC address. When manually entered, to select an ISO (Alma 8/Centos 7), netboot just loops back to not configuring the network.
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural.
It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
You might want to specify the exact node name, it doesn't go by specific clusters or anything like that or at least it shouldn't in terms of IP blocks, ISO, and so on. I already have a list on my end of all the nodes that need ISO cleanup but this sounds like it might be something else. I've seen it happen before though, whatever you're describing. I never got to check back to see if it the problem went away with a resync or if it's related to the VM configuration.
Virtfusion!!!!!!!
I bench YABS 24/7/365 unless it's a leap year.
Had edited to add it, just a few minutes later (after I checked).
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural.
It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
Yo' if ya could not do that properly,
then don' touch it an' keep it default
Simple fact tha' even it sucks by default,
no fella will blame ya
O' don' forge' fulfill your empty promise for sending more Tokyo racks
Yo' I'm a cynical & lowlife fella, and hardcore masochist nevertheless
Ontario Dildo Inspector
Apart from you.
In stasis until the shitposting stops/abates.
Than=compare;then=sequence:brought=bring;bought=buy:staffs=pile of sticks:informations/infos=no plural.
It wisnae me! A big boy done it and ran away. || NVMe2G for life! until death (the end is nigh).
My ticket #733438 Subject: IPv6 Request - DALZ003
on hold from 07/07/2023 (07:35). Please help me check it. Thank @VirMach !
https://dttech.top - Personal Site.
I don't expect that IPv6 is currently available in Dallas. I have only seen IPv6 in Tokyo, and Frankfurt, and maybe some in Amsterdam. Although I have had an ticket in for Amsterdam IPv6 since 31 March, so maybe not available in Amsterdam anymore. I'm just saying don't get your hopes up.
My ticket #172414 Subject: IPv6 Request - 47.87.158.3 - MIAZ011 [MERGED]
on hold from 12/21/2022 (05:12). Please help me check it. Thank VirBot !
We accept Karma donations for the last flan. 🍮 affbrr