iHostART - 5.5$/yr 50 GB HDD & 512 MB & 1 vCore & Public Torrent allowed & DMCA Ignore & 1x IPv4 NAT

12357…19

Comments

  • CalinCalin

    Hello @hotsnow done , it s delivery

    Hello @yoursunny very beautiful projecti ideea on this cheap VPS!

    Regards,
    Calin

  • hotsnowhotsnow
    edited November 2022

    @Calin said:
    Hello @hotsnow done , it s delivery

    got it, but seems no IPv6 in vps, and can't find it in email or WHMCS, could you please help check it?

    and when the FREE RAM can be added? thanks =)

    Thanked by (1)Calin
  • adwsislifeadwsislife

    @hotsnow said:

    @adwsislife said:

    @Calin said:
    2 TB bandwidth with 1 GBps speed/month (if the limit is exceeded, it is limited to 100 mbit/s unlimited until the following month)

    Hello calin
    After 2TB is exhausted, what is the limit per month @ 100mbit/s?

    it is limited to 100 mbit/s unlimited until the following month :)

    Hello @hotsnow
    yes, I have seen the word unlimited.
    but wanted to double confirm before exceeding bandwidth limit and getting into some unknown troubles may be :)
    That's why I had tagged @Calin

    Thanked by (2)hotsnow Calin
  • iyciyc

    Invoice #681
    Thank you!

  • jmaxwelljmaxwell

    @yoursunny said:
    Well, I switched to a different method:

    1. I installed WireGuard client on the LowEndSeedbox, with AllowedIPs set to the subnet of my other WireGuard clients.
    2. Firewall allows accessing qBittorrent WebUI and Rclone HTTP server only on the WireGuard interface.
    3. I can operate qBittorrent and stream TV episodes on my other WireGuard clients.

    Traffic is still encrypted but there's no TLS involved.

    What were you originally trying to do ?

    Why?

  • AndrewsAndrews OG

    @jmaxwell said:

    @yoursunny said:
    Well, I switched to a different method:

    1. I installed WireGuard client on the LowEndSeedbox, with AllowedIPs set to the subnet of my other WireGuard clients.
    2. Firewall allows accessing qBittorrent WebUI and Rclone HTTP server only on the WireGuard interface.
    3. I can operate qBittorrent and stream TV episodes on my other WireGuard clients.

    Traffic is still encrypted but there's no TLS involved.

    What were you originally trying to do ?

    maybe the most complicated setup on the earth

    you know, when each episode of your favorite soap opera costs you so much effort to get it... than it tastes much better :D

    Thanked by (2)yoursunny Mason
  • jmaxwelljmaxwell

    @Andrews said:

    @jmaxwell said:

    @yoursunny said:
    Well, I switched to a different method:

    1. I installed WireGuard client on the LowEndSeedbox, with AllowedIPs set to the subnet of my other WireGuard clients.
    2. Firewall allows accessing qBittorrent WebUI and Rclone HTTP server only on the WireGuard interface.
    3. I can operate qBittorrent and stream TV episodes on my other WireGuard clients.

    Traffic is still encrypted but there's no TLS involved.

    What were you originally trying to do ?

    maybe the most complicated setup on the earth

    you know, when each episode of your favorite soap opera costs you so much effort to get it... than it tastes much better :D

    Pull outs in mud

    Why?

  • yoursunnyyoursunny OG

    @jmaxwell said:

    @yoursunny said:
    Well, I switched to a different method:

    1. I installed WireGuard client on the LowEndSeedbox, with AllowedIPs set to the subnet of my other WireGuard clients.
    2. Firewall allows accessing qBittorrent WebUI and Rclone HTTP server only on the WireGuard interface.
    3. I can operate qBittorrent and stream TV episodes on my other WireGuard clients.

    Traffic is still encrypted but there's no TLS involved.

    What were you originally trying to do ?

    Caddy on IPv6 port 443, with HTTP Basic auth.

    @Andrews said:
    maybe the most complicated setup on the earth

    you know, when each episode of your favorite soap opera costs you so much effort to get it... than it tastes much better :D

    I access PulsedMedia seedbox via Caddy reverse proxy on WireGuard server.
    It's for a different reason: getting around network congestion and lack of TCP BBR.

    Thanked by (1)jmaxwell

    Accepting submissions for IPv6 less than /64 Hall of Incompetence.

  • elliotcelliotc OG

    Invoice #683
    thanks

    Action and Reaction in history

  • Catnip8394Catnip8394

    Invoice #685
    thanks

  • NekkiNekki OG

    @yoursunny said:

    @jmaxwell said:

    @yoursunny said:
    Well, I switched to a different method:

    1. I installed WireGuard client on the LowEndSeedbox, with AllowedIPs set to the subnet of my other WireGuard clients.
    2. Firewall allows accessing qBittorrent WebUI and Rclone HTTP server only on the WireGuard interface.
    3. I can operate qBittorrent and stream TV episodes on my other WireGuard clients.

    Traffic is still encrypted but there's no TLS involved.

    What were you originally trying to do ?

    Caddy on IPv6 port 443, with HTTP Basic auth.

    @Andrews said:
    maybe the most complicated setup on the earth

    you know, when each episode of your favorite soap opera costs you so much effort to get it... than it tastes much better :D

    I access PulsedMedia seedbox via Caddy reverse proxy on WireGuard server.
    It's for a different reason: getting around network congestion and lack of TCP BBR.

    Why not just get a seedbox provider that doesn’t have horrible congestion?

  • yoursunnyyoursunny OG
    edited November 2022

    @Nekki said:
    Why not just get a seedbox provider that doesn’t have horrible congestion?

    • iHostART €5.50 for 50GB
    • AlexHost €11.88 for 10GB
    • PulsedMedia €18 for 450GB
    • IncogNet $25 for 20GB
    • BuyVM $57 for 256GB

    I usually download MeGusta content that is 600MB for a double-length 80min episode.
    However, some content (e.g. PilotsEye) is only available in bigger files, up to 18GB for an episode.
    Hence, I want at least 30GB disk.

    PulsedMedia is increasing to €81, so I'm switching to iHostART.

    Accepting submissions for IPv6 less than /64 Hall of Incompetence.

  • jmaxwelljmaxwell

    @yoursunny said:

    @Nekki said:
    Why not just get a seedbox provider that doesn’t have horrible congestion?

    • iHostART €5.50 for 50GB
    • AlexHost €11.88 for 10GB
    • PulsedMedia €18 for 450GB
    • IncogNet $25 for 20GB
    • BuyVM $57 for 256GB

    I usually download MeGusta content that is 600MB for a double-length 80min episode.
    However, some content (e.g. PilotsEye) is only available in bigger files, up to 18GB for an episode.
    Hence, I want at least 30GB disk.

    PulsedMedia is increasing to €81, so I'm switching to iHostART.

    Why not oracle free tier ? (Zurich)

    Why?

  • elliotcelliotc OG

    This reminds me of the Wishosting nat box that has ended.

    Action and Reaction in history

  • yoursunnyyoursunny OG

    @jmaxwell said:
    Why not oracle free tier ? (Zurich)

    Oracle is not DMCA ignored.

    Accepting submissions for IPv6 less than /64 Hall of Incompetence.

  • jmaxwelljmaxwell

    @yoursunny said:

    @jmaxwell said:
    Why not oracle free tier ? (Zurich)

    Oracle is not DMCA ignored.

    Apparently Zurich location is. I’ve been using public torrents since a few months now.

    Why?

  • deepak_lebdeepak_leb OG

    Is it still available? @Calin

  • adwsislifeadwsislife

    @deepak_leb said:
    Is it still available? @Calin

    https://i.ibb.co/bHcRZnz/image.png

  • yoursunnyyoursunny OG

    @adwsislife said:

    @deepak_leb said:
    Is it still available? @Calin

    https://i.ibb.co/bHcRZnz/image.png

    LowEndSeedbox is fast at the moment.
    I set qBittorrent limits to 5MB/s upload, 5MB/s download, 100 connections, 8 upload slots.
    Within the same duration on the same private tracker, it's getting higher ratio than PulsedMedia.

    Once all these 200+ slots are filled, I expect a significant performance drop.
    Disk bandwidth is shared after all.
    The server has 4TB disks so there are 80 slots per disk.
    Disk bandwidth is 80MB/s so each slot gets average 1MB/s.

    Accepting submissions for IPv6 less than /64 Hall of Incompetence.

  • AndrewsAndrews OG

    @yoursunny said:

    @adwsislife said:

    @deepak_leb said:
    Is it still available? @Calin

    https://i.ibb.co/bHcRZnz/image.png

    LowEndSeedbox is fast at the moment.
    I set qBittorrent limits to 5MB/s upload, 5MB/s download, 100 connections, 8 upload slots.
    Within the same duration on the same private tracker, it's getting higher ratio than PulsedMedia.

    Once all these 200+ slots are filled, I expect a significant performance drop.
    Disk bandwidth is shared after all.
    The server has 4TB disks so there are 80 slots per disk.
    Disk bandwidth is 80MB/s so each slot gets average 1MB/s.

    limiting factor here will not be a hard disk transfer rate (that mentioned 80MB/s) but number of IOPS these disks are able to provide

  • ialexpwialexpw OGServices Provider

    Invoice #689 - had to give it a go..

  • adwsislifeadwsislife
    edited November 2022

    Hello @Calin
    Node seems to be offline?
    I am not even able to ping it :(
    https://i.ibb.co/hCpgCZ5/image.png

  • codelockcodelock

    @adwsislife said:
    Hello @Calin
    Node seems to be offline?
    I am not even able to ping it :(
    https://i.ibb.co/hCpgCZ5/image.png

    Yup seems down

    Want free vps ? https://microlxc.net

  • AdvinAdvin Hosting Provider

    @jmaxwell said:
    Server goes unreachable while running GB5 test.

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
    # Yet-Another-Bench-Script #
    # v2022-08-20 #
    # https://github.com/masonr/yet-another-bench-script #
    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

    Mon Nov 7 04:31:26 EST 2022

    Basic System Information:
    ---------------------------------
    Uptime : 0 days, 13 hours, 24 minutes
    Processor : Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz
    CPU cores : 1 @ 1200.000 MHz
    AES-NI : � Enabled
    VM-x/AMD-V : � Enabled
    RAM : 512.0 MiB
    Swap : 0.0 KiB
    Disk : 50.1 GiB
    Distro : Ubuntu 20.04.5 LTS
    Kernel : 5.4.0

    fio Disk Speed Tests (Mixed R/W 50/50):
    ---------------------------------
    Block Size | 4k (IOPS) | 64k (IOPS)
    ------ | --- ---- | ---- ----
    Read | 954.00 KB/s (238) | 7.74 MB/s (121)
    Write | 986.00 KB/s (246) | 8.16 MB/s (127)
    Total | 1.94 MB/s (484) | 15.90 MB/s (248)
    | |
    Block Size | 512k (IOPS) | 1m (IOPS)
    ------ | --- ---- | ---- ----
    Read | 6.38 MB/s (12) | 6.92 MB/s (6)
    Write | 7.14 MB/s (13) | 7.34 MB/s (7)
    Total | 13.52 MB/s (25) | 14.26 MB/s (13)

    iperf3 Network Speed Tests (IPv4):
    ---------------------------------
    Provider | Location (Link) | Send Speed | Recv Speed
    | | |
    Clouvider | London, UK (10G) | 34.1 Mbits/sec | 480 Mbits/sec
    Online.net | Paris, FR (10G) | 498 Mbits/sec | 800 Mbits/sec
    Hybula | The Netherlands (40G) | 526 Mbits/sec | 867 Mbits/sec
    Uztelecom | Tashkent, UZ (10G) | 456 Mbits/sec | 365 Mbits/sec
    Clouvider | NYC, NY, US (10G) | 393 Mbits/sec | 317 Mbits/sec
    Clouvider | Dallas, TX, US (10G) | 343 Mbits/sec | 154 Mbits/sec
    Clouvider | Los Angeles, CA, US (10G) | 257 Mbits/sec | 183 Mbits/sec

    Geekbench 5 test failed. Run manually to determine cause.

    I don't know if you solved this yet, but it's most likely running out of memory. GB5 can't run on 512MB of memory.

    If it has a SWAP file by default, and it's defaulting to SWAP on those disk speeds, I can see why it would crash 🙈

    I am a representative of Advin Servers

  • CalinCalin

    Hello , done now working

    Regards,
    Calin

  • jmaxwelljmaxwell

    makes sense. Here is the YABS after extra memory was added.

    # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #
#              Yet-Another-Bench-Script              #
#                     v2022-08-20                    #
# https://github.com/masonr/yet-another-bench-script #
# ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## #

Tue Nov  8 05:31:13 EST 2022

Basic System Information:
---------------------------------
Uptime     : 0 days, 14 hours, 41 minutes
Processor  : Intel(R) Xeon(R) CPU E5-2450L 0 @ 1.80GHz
CPU cores  : 1 @ 1290.000 MHz
AES-NI     : ✔ Enabled
VM-x/AMD-V : ✔ Enabled
RAM        : 896.0 MiB
Swap       : 0.0 KiB
Disk       : 50.1 GiB
Distro     : Ubuntu 20.04.5 LTS
Kernel     : 5.4.0

fio Disk Speed Tests (Mixed R/W 50/50):
---------------------------------
Block Size | 4k            (IOPS) | 64k           (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 791.00 KB/s    (197) | 8.15 MB/s      (127)
Write      | 828.00 KB/s    (207) | 8.59 MB/s      (134)
Total      | 1.61 MB/s      (404) | 16.74 MB/s     (261)
           |                      |
Block Size | 512k          (IOPS) | 1m            (IOPS)
  ------   | ---            ----  | ----           ----
Read       | 10.09 MB/s      (19) | 9.27 MB/s        (9)
Write      | 11.26 MB/s      (21) | 10.45 MB/s      (10)
Total      | 21.35 MB/s      (40) | 19.73 MB/s      (19)

iperf3 Network Speed Tests (IPv4):
---------------------------------
Provider        | Location (Link)           | Send Speed      | Recv Speed
                |                           |                 |
Clouvider       | London, UK (10G)          | 43.5 Mbits/sec  | 329 Mbits/sec
Online.net      | Paris, FR (10G)           | 496 Mbits/sec   | 596 Mbits/sec
Hybula          | The Netherlands (40G)     | 491 Mbits/sec   | 897 Mbits/sec
Uztelecom       | Tashkent, UZ (10G)        | 375 Mbits/sec   | 388 Mbits/sec
Clouvider       | NYC, NY, US (10G)         | 367 Mbits/sec   | 229 Mbits/sec
Clouvider       | Dallas, TX, US (10G)      | 343 Mbits/sec   | 164 Mbits/sec
Clouvider       | Los Angeles, CA, US (10G) | 353 Mbits/sec   | 161 Mbits/sec

Geekbench 5 Benchmark Test:
---------------------------------
Test            | Value
                |
Single Core     | 480
Multi Core      | 483
Full Test       | https://browser.geekbench.com/v5/cpu/18505940

    Why?

  • ialexpwialexpw OGServices Provider
    edited November 2022

    @Calin said:
    Hello , done now working

    Regards,
    Calin

    Could you check invoice #689? I've paid it, but it's still showing as unpaid for a while.

    edit: marked as paid now, just waiting on the service!

  • hotsnowhotsnow

    @Calin may I ask when the IPv6 can working? thanks

    Thanked by (1)yoursunny
  • yoursunnyyoursunny OG

    @hotsnow said:
    @Calin may I ask when the IPv6 can working? thanks

    if IPv6 doesn t work by day 89 , we can all demand refounds

    Thanked by (1)hotsnow

    Accepting submissions for IPv6 less than /64 Hall of Incompetence.

  • alexxggalexxgg OG

    VPS is up and ready. would like to have those extra 384 MB RAM. Invoice #686

Sign In or Register to comment.

© LowEndSpirit 2024

ipv6 ready